Tyco Safety Products/Sensormatic UMEXCAL 用户手册
Preliminary
AMS-1070 CONTROLLER INSTALLATION GUIDE (8200-0127-06, REV. 0)
1 of 13
AMS-1070 Controller
Installation Guide
ZEDEX-1070
Contents
Connecting the Antennas and Remote Alarm
Module ............................................................... 5
Module ............................................................... 5
Connecting two short antennas and a remote
alarm module .............................................. 5
alarm module .............................................. 5
Connecting a split-receiver (dual-aisle)
configuration................................................ 6
configuration................................................ 6
© Sensormatic 2002
About this Guide
This installation guide explains how to install the
controller for an AMS-1070 system. This document
only describes how to install the controller and
connect the antenna cables. Information on how to
mount the antennas is in the antenna documents.
Other related documents are:
controller for an AMS-1070 system. This document
only describes how to install the controller and
connect the antenna cables. Information on how to
mount the antennas is in the antenna documents.
Other related documents are:
•
Install Guide, AMS-1070 Antenna, P/N 8200-
0127-01
0127-01
•
Quick Install Guide, AMS-1070 Remote Alarm
Module, P/N 8200-0127-02
Module, P/N 8200-0127-02
•
Installation Guide, Digital 216 Noise Coils 8000-
2693-05
2693-05
•
Quick Install Guide, AMS-1070 Antenna Flush-
Mount Brackets, P/N 8200-0127-07
Mount Brackets, P/N 8200-0127-07
•
Quick Install Guide, AMS-1070 Antenna
Cantilever-Mount Brackets, P/N 8200-0127-08
Cantilever-Mount Brackets, P/N 8200-0127-08
•
Quick Install Guide, AMS-1070 Antenna Pole-
Mount Brackets, P/N 8200-0127-09
Mount Brackets, P/N 8200-0127-09
•
Installation Guide, AMS-1070 Controller EMI
Shield 8200-0127-12
Shield 8200-0127-12
•
Installation Guide, AMS-1070 Controller Under
Counter Installation Guide 8200-0127-13
Counter Installation Guide 8200-0127-13
•
Installation Guide, AMS-1070/ScanMax Pro
Deactivator Mounting Plate 8200-0127-14
Deactivator Mounting Plate 8200-0127-14
Note: Because customer requirements dictate the
placement of system components, your
Sensormatic representative will supply this
information separately.
placement of system components, your
Sensormatic representative will supply this
information separately.