Comtek Communications Technology Inc PR75A 用户手册
PR-75a BATTERY INFORMATION
Page 8
Low Battery Indicator
The LED indicator on the PR-75a is a multi-function indicator which
includes low battery detection. When the receiver is operating normally,
the LED indicator illuminates continuously indicating that the receiver is
receiving a signal on the tuned channel. If
the battery is low, the LED will show a
steady fast flash indicating the battery
is low. Additionally, if the user is
monitoring, an audible beeping sound
will be heard warning that the battery
will be dead soon. Replace a low
battery immediately as performance of
the receiver will be unpredictable and
may vary from audio distortion to
complete failure to operate.
includes low battery detection. When the receiver is operating normally,
the LED indicator illuminates continuously indicating that the receiver is
receiving a signal on the tuned channel. If
the battery is low, the LED will show a
steady fast flash indicating the battery
is low. Additionally, if the user is
monitoring, an audible beeping sound
will be heard warning that the battery
will be dead soon. Replace a low
battery immediately as performance of
the receiver will be unpredictable and
may vary from audio distortion to
complete failure to operate.
Battery Removal / Replacement
Battery indicator LED
Pull back battery door latch and allow
battery cover door to spring open. To
remove batteries, simply manipulate
the negative (-) end of battery out of
the compartment and remove.
To insert batteries, manipulate the
positive (+) end into place with correct
polarity as shown. Press batteries into
compartment and close battery door until
it snaps shut. Note: Battery polarity
must be correct for unit to operate.
positive (+) end into place with correct
polarity as shown. Press batteries into
compartment and close battery door until
it snaps shut. Note: Battery polarity
must be correct for unit to operate.