N. V. Nederlandsche Apparatenfabriek NEDAP NECKTAGCP 用户手册
N
The NECK TAG CP ACT is a label that oa attacjhed to the cows neck and it determines the where the cow is
located in the stable also it also monitors the behavior of individual cows 24/7 and
cow’s in heat. A cow in heat shows more activity then being in a “normal” state of condition.
The main parts of the NECK TAG CP ACT
and health detection are:
1. Cow positioning together with the beacon VP4201
2. An acceleration sensor detecting motions.
3. A battery (active) assisted RFID (=Radio Frequency Identification) tag for individual cow activity
located in the stable also it also monitors the behavior of individual cows 24/7 and
cow’s in heat. A cow in heat shows more activity then being in a “normal” state of condition.
The main parts of the NECK TAG CP ACT
and health detection are:
1. Cow positioning together with the beacon VP4201
2. An acceleration sensor detecting motions.
3. A battery (active) assisted RFID (=Radio Frequency Identification) tag for individual cow activity
monitoring, operating on 433.3, 433.6,
4. The 134.2 kHz inductive RFID tag (passive) is optional
The location of the cow in the stable is monitored every .10 seconds.
The motions of the cow are stored in the memory of the RFID tag transmit
of this transmission is min. 5 minutes and max
The antenna in the barn receives the activity information from the R
information is transported by means of the
process controller and is e.g. used for ovulation/heat detecting, automatic cattle feeding, separation of
animals, milk registration etc.
The Velos program determines the activity increase of an animal. If an animal is a lot more active than usual
it will get an heat attention. The red light on the process unit will indicate this attention. The Velos program
displays overviews of animals with a clear increased
Figures below show how the NECK TAG CP
The location of the cow in the stable is monitored every .10 seconds.
The motions of the cow are stored in the memory of the RFID tag transmit
of this transmission is min. 5 minutes and max
The antenna in the barn receives the activity information from the R
information is transported by means of the
process controller and is e.g. used for ovulation/heat detecting, automatic cattle feeding, separation of
animals, milk registration etc.
The Velos program determines the activity increase of an animal. If an animal is a lot more active than usual
it will get an heat attention. The red light on the process unit will indicate this attention. The Velos program
displays overviews of animals with a clear increased
Figures below show how the NECK TAG CP
NOTE:
The label can only monitor the behavior of the animals if placed on the cows neck in the right position.
Wrong Position of the label:
1. Back to front
Label attached backwards, the groove (and the arrow on the back of the label) is pointing towards
the cows body instead of the cows head.
the cows body instead of the cows head.
2. Check position
Turned sideways on the neck or twisted on the collar.
Doc. Part. No. 5282039
NECK TAG CP ACT
that oa attacjhed to the cows neck and it determines the where the cow is
monitors the behavior of individual cows 24/7 and the system will detect the
A cow in heat shows more activity then being in a “normal” state of condition.
ACT for the purpose of cow positioning and activity mea
together with the beacon VP4201
motions.
battery (active) assisted RFID (=Radio Frequency Identification) tag for individual cow activity
, 433.8, 434.0, 434.2 and 434.5 MHz.
34.2 kHz inductive RFID tag (passive) is optional.
cation of the cow in the stable is monitored every .10 seconds.
memory of the RFID tag transmitting this data. The rep
and max. 15 minutes depending on the cow’s activity.
The antenna in the barn receives the activity information from the RFID tag of the individual animals and
by means of the receiver VP4102 over CAN bus or Ethernet to the host computer
g. used for ovulation/heat detecting, automatic cattle feeding, separation of
The Velos program determines the activity increase of an animal. If an animal is a lot more active than usual
attention. The red light on the process unit will indicate this attention. The Velos program
verviews of animals with a clear increased heat attention on the PC screen.
CP ACT is attached to the cow’s neck
The label can only monitor the behavior of the animals if placed on the cows neck in the right position.
Label attached backwards, the groove (and the arrow on the back of the label) is pointing towards
body instead of the cows head.
Turned sideways on the neck or twisted on the collar.
Doc. Part. No. 5282039
that oa attacjhed to the cows neck and it determines the where the cow is
will detect the
aning heat –
battery (active) assisted RFID (=Radio Frequency Identification) tag for individual cow activity
repetition rate
of the individual animals and the
receiver VP4102 over CAN bus or Ethernet to the host computer
g. used for ovulation/heat detecting, automatic cattle feeding, separation of
The Velos program determines the activity increase of an animal. If an animal is a lot more active than usual
attention. The red light on the process unit will indicate this attention. The Velos program
The label can only monitor the behavior of the animals if placed on the cows neck in the right position.
Label attached backwards, the groove (and the arrow on the back of the label) is pointing towards