Rhine Electronics Co Ltd 7238T 用户手册
2
5.
5.
5.
5.
Start the fan
Press the FAN speed
Press the FAN speed
button
.
6.
6.
6.
6.
Turn off the fan :
Press the OFF button .
7.
7.
7.
7.
Light control :
Turn the light on or off
by only touching the LIGHT CONTROL
button .
Keep pressing the button in excess of
0.7 second it becomes a dimmer ,
the light varies cyclically in
0.8 second .
GENERAL INFORMATION :
This REMOTE controller is designed to separately control your
ceiling fan speed and light brightness . The Light
ON/OFF button will control the light brightness ON/OFF .
The LED indicator on the transmitter will light when the Function button is pressed .
ceiling fan speed and light brightness . The Light
ON/OFF button will control the light brightness ON/OFF .
The LED indicator on the transmitter will light when the Function button is pressed .
INSTRUCTIONS FOR INSTALLATION AND OPERATION OF FAN SPEED
CONTROLLER
CONTROLLER
1. Setting the code on your new transmitter .
Within 60 seconds of turning the AC power on, press and hole the FAN ON/OFF
button for 5 seconds. The receiver will then lock in the chosen frequency.
If your fan has a light it it will blink twice, for fans without lights check operation using the
transmitter
transmitter
Light set Switch –
For set light dimmer type
or light ON/OFF type control
Address set Switch –
Slide code switches to the same positions
as set on your transmitter .
They must be set to same positions to
work .