Rockford Corporation FS80TX 用户手册
32
PROGRAMMABLE OPTIONS Cont.
21. REMOTE START ENGINE RUN TIME:
You can set the engine run time for 20, 15, 10 or 3 minutes as desired. Some cities have an unattended vehicle Run
Time Limit. Check your local laws. The Default = 20 minutes.
22. CHIRPS WITH REMOTE START ACTIVATION:
This option controls whether the system gives 3 short Siren and Horn Chirps when activating remote start.
23. TURBO TIMER: Using Remote Start Button
The optional Turbo Timer mode allows the CoolStart system to keep a Turbo or Turbo Diesel vehicle running for 1, 3
or 6 minutes [selectively] after you remove the key and exit the vehicle. This is handy for turbo cool-down without
the need for expensive turbo timers. The Default = OFF.
The optional Turbo Timer mode allows the CoolStart system to keep a Turbo or Turbo Diesel vehicle running for 1, 3
or 6 minutes [selectively] after you remove the key and exit the vehicle. This is handy for turbo cool-down without
the need for expensive turbo timers. The Default = OFF.
24. IDLE DOWN:
This feature allows the remote starter to take over operation of a parked vehicle when the ignition key is removed
and you exit the vehicle. The vehicle will remain running for the programmed time or until canceled. The choices
are: 15, 30, 45 minutes or Infinity Run. The Default = 15 minutes.
25. LOCK WITH REMOTE START and REMOTE START ABORT:
This option controls whether the unit will automatically lock during and after a remote Start abort or time-out. There
are 4 choices for this option:
This feature allows the remote starter to take over operation of a parked vehicle when the ignition key is removed
and you exit the vehicle. The vehicle will remain running for the programmed time or until canceled. The choices
are: 15, 30, 45 minutes or Infinity Run. The Default = 15 minutes.
25. LOCK WITH REMOTE START and REMOTE START ABORT:
This option controls whether the unit will automatically lock during and after a remote Start abort or time-out. There
are 4 choices for this option:
1. Lock with Remote Start and Lock / Arm with Remote Start Abort - Default.
2. OFF
3. Lock with Remote Start Only.
4. Lock / Arm with Remote Start Abort only
2. OFF
3. Lock with Remote Start Only.
4. Lock / Arm with Remote Start Abort only
26. TRANSMISSION TYPE: Requires Tach Wire connected and programmed
This option selects automatic or manual transmission mode
1. Automatic Transmission – Default.
2. Manual Shift Transmission - Requires Remote Start Button pressed with (-) Hand Brake Activated.
3. Manual Shift Transmission – Starts Exit procedure with (-) Hand Brake Set and engine running.
2. Manual Shift Transmission - Requires Remote Start Button pressed with (-) Hand Brake Activated.
3. Manual Shift Transmission – Starts Exit procedure with (-) Hand Brake Set and engine running.