Rockford Corporation RX01-2W433 用户手册
RS2-G3
ONE BUTTON 2-WAY REMOTE START SYSTEM
INSTALLATION INSTRUCTIONS
CONGRATULATIONS on your choice of a “Cool Start” System with Data Port Technology for direct connection to
bypass module by Crime stopper Security Products Inc. This booklet contains the information necessary for
installing your remote starter system. If any questions arise, contact your installation dealer or Crime stopper
Security Products Inc. at the Tech Support number below.
bypass module by Crime stopper Security Products Inc. This booklet contains the information necessary for
installing your remote starter system. If any questions arise, contact your installation dealer or Crime stopper
Security Products Inc. at the Tech Support number below.
DISCLAIMER:
This installation book is designed for the installer or individual with an existing understanding of automotive electrical
systems, along with the ability to test and connect wires for proper operation. To ease installation, we suggest that
you READ THIS MANUAL before beginning your installation. This book is provided as a GENERAL GUIDELINE
and the information contained herein may differ from your vehicle. Crime stopper Security Products, Inc. and its’
vendors shall not be liable for any accident resulting from the use of this product. This system is designed to be
professionally installed into a vehicle in which all systems and associated components are in perfect working
condition.
TECHNICAL SUPPORT: (800) 998-6880
Monday - Friday 8:00am - 4:30pm Pacific Std. Time
Web Site: www.crimestopper.com
CRIMESTOPPER SECURITY PRODUCTS, INC.
1770 S. TAPO STREET, SIMI VALLEY, CA. 93063
Monday - Friday 8:00am - 4:30pm Pacific Std. Time
Web Site: www.crimestopper.com
CRIMESTOPPER SECURITY PRODUCTS, INC.
1770 S. TAPO STREET, SIMI VALLEY, CA. 93063
REV 07-25-2014
This device complies with FCC Rules part 15. Operation is subject
to the following two conditions: (1) This device may not cause
harmful interference, and (2) This device must accept any
interference that may be received, including interference that may
cause undesired operation. The manufacturer is not responsible for
any radio or TV interference caused by unauthorized modifications
to this equipment. Such modification could void the user’s authority
to use the equipment.
to the following two conditions: (1) This device may not cause
harmful interference, and (2) This device must accept any
interference that may be received, including interference that may
cause undesired operation. The manufacturer is not responsible for
any radio or TV interference caused by unauthorized modifications
to this equipment. Such modification could void the user’s authority
to use the equipment.