Toshiba Client Solutions CO. LTD. UMET401WL 用户手册

22

❖

If your computer is started or restarted or any of its operation 
resumed while the gigabeat

®

 is still connected to the 

computer, your computer may stop before completing the 
startup process or resumption of operation depending on the 
specification of your computer. In this case, remove the 
gigabeat

®

 from your computer and restart the computer.

❖

If your computer has entered and exited the Standby mode or 
Sleep mode while gigabeat was still connected, the computer 
may no longer communicate with the gigabeat

®

 properly. If 

this happens, connect your computer and the gigabeat

®

 again.

❖

Once you have connected your computer and the gigabeat

®

and the message “The gigabeat

®

 is now connected” appears 

on the screen, the gigabeat can no longer be operated. If the 
gigabeat

®

 is connected to your computer while music is 

playing, the playback will stop.

❖

Do not use a USB hub to reconnect the gigabeat

®

 and your 

computer. If you use a USB hub the gigabeat

®

/computer may 

not function.

After the dots have stopped circling and while the message “The 
gigabeat

®

 is now connected” is shown on the screen

,

 unplug the 

USB cable from the gigabeat

®

.

While data is being transmitted between your computer and the 
gigabeat

®

, “Updating data” and other messages are shown on the 

gigabeat

®

 screen. Do not unplug or plug the USB cable while the 

screen indicates that processing is still in progress (see the image 

NOTE