Axcera 79XITS-7045 用户手册
WaveCom Electronics Inc
MA4040D Manual; MAN1L0901 REV 13(0104)
Approved: D.P.
33
IAS - Set Auto IF Threshold
Description: Sets the Auto IF Thresholds for the specified module.
Parameters: Desired IF thresholds in dB, in the form X.X<sp>-X.X. Leading zeros are optional, but not required. The
decimal point and trailing character is required. The first parameter is the positive threshold and can range between
4.0 and 0.0 dB. The second parameter is the negative threshold and can range between 0.0 and -4.0 dB. The
trailing character can range between 0.0 and 0.9.
4.0 and 0.0 dB. The second parameter is the negative threshold and can range between 0.0 and -4.0 dB. The
trailing character can range between 0.0 and 0.9.
Example:
*999<sp>A<sp>IAS<sp>1.5<sp>-1.5<sp>CRC<cr>
Response: OK or MOD or ERR or CRC
IAE - Enable Auto IF
Description: Enables Auto IF Mode for the specified module.
Parameters: None
Example:
*999<sp>A<sp>IAE<sp>CRC<cr>
Response: OK or MOD or ERR or CRC
IAD - Disable Auto IF
Description: Disables Auto IF Mode for the specified module.
Parameters: None
Example:
*999<sp>A<sp>IAD<sp>CRC<cr>
Response: OK or MOD or ERR or CRC
RTS - Set RF Threshold
Description: Sets the RF Thresholds for the specified module.
Parameters: Desired RF thresholds in dBmV, in the form XX.X<sp>XX.X. Leading zeros are optional, but not
required. The decimal point and trailing character is required. The first parameter indicates the high threshold, and
the second indicates the low threshold. The trailing character can range between 0.0 and 0.9.
the second indicates the low threshold. The trailing character can range between 0.0 and 0.9.
Example:
*999<sp>A<sp>RTS<sp>60.0<sp>50.0<sp>CRC<cr>
Response: OK or MOD or ERR or CRC
RTE - Enable RF Threshold
Description: Enables RF Threshold detection for the specified module.
Parameters: None
Example:
*999<sp>A<sp>RTE<sp>CRC<cr>
Response: OK or MOD or ERR or CRC
RTD - Disable RF Threshold
Description: Disables RF Threshold detection for the specified module.
Parameters: None
Example:
*999<sp>A<sp>RTD<sp>CRC<cr>
Response: OK or MOD or ERR or CRC
OE - Enable Output
Description: Turns on the Output from the specified module.
Parameters: None
Example:
*999<sp>A<sp>OE<sp>CRC<cr>
Response: OK or MOD or ERR or CRC