Japan Radio Co Ltd. NKE2042 用户手册
82
TRX-MHV
Moduration error of transmitter or reciever
SSW OFF
Safety switch OFF of scanner unit
TRX-HL
Standard rotation signal error of scanner unit
TRX-AZI
Rotation signal error of scanner unit
TRX-REV
Reverse rotation error of scanner unit
TRX-TRIGER
Transmission trigger error of scanner unit
TRX-VIDEO
Video error of scanner unit
PRC-HL
Standard rotation signal error of display unit
PRC-AZI
Rotation signal error of display unit
PRC-TRIGER
Trigger signal error of display unit
PRC-VIDEO
Video signal error of display unit
3.7.5 Clearing the error log [ALARM ACK]
Take the following steps to clear the error log.
(a) Hold
(a) Hold
down
[ALARM ACK]
key to display the ALARM menu.
(b) Select ERROR LOG CLR , and then press [JOG DIAL] or [ACQ/ENT] .
(c) The menu below is displayed. Turn [JOG DIAL] to select ON , and then press the [JOG
(c) The menu below is displayed. Turn [JOG DIAL] to select ON , and then press the [JOG
DIAL]
or [ACQ/ENT] key to determine the selection.
BUZZER >
ERROR LOG CLR
OFF
OFF
ON
ALARM
3.7.6 Operating the self-diagnostic function [MENU]
The self-diagnostic function is installed to activate the self-diagnostic mode after the power is
turned on.
This function gets the system to automatically diagnose itself for normal operation.
turned on.
This function gets the system to automatically diagnose itself for normal operation.
Take the following step to start the self
Take the following step to start the self
Take the following step to start the self
Take the following step to start the self----diagnostic function:
diagnostic function:
diagnostic function:
diagnostic function:
(a) Turn on the power while pressing the [EBL] and [VRM] keys at the same time.
The self-diagnostic function starts.
3.7.7 Displaying the help menu
The HELP function is installed to explain keys for operating special functions when the power is
turned on.
turned on.
Take the following steps to operate the HELP function:
Take the following steps to operate the HELP function:
Take the following steps to operate the HELP function:
Take the following steps to operate the HELP function:
(a) Hold
(a) Hold
down
the
[MENU]
key to display MENU .
(b) Operate
[JOG DIAL]
to select HELP , and then press the [JOG DIAL] or [ACQ/ENT] key.
As shown below, the keys for operating special functions are displayed in two lists when
the power is turned.
the power is turned.