Japan Radio Co Ltd. NKE2042 用户手册
49
4. Measuring the distance from own ship using VRM#1 [VRM1/VRM2]
(a) Press
the
[VRM1/VRM2]
key to reverse the value of VRM#1.
(b) Press [JOG DIAL] several times until the jog dial mode display at the right bottom of the
screen changes to "JOG VRM1."
"JOG VRM1."
"JOG VRM1."
"JOG VRM1."
(c) In this status, turn [JOG DIAL] to adjust the line of VRM#1 to the target, and read the
value of VRM#1 to measure the distance to the target.
In the figure above, the distance from the own ship to the target is 4 NM.
5. Measuring the distance from own ship using VRM#2 [VRM1/VRM2]
(a) Press
the
[VRM1/VRM2]
key to reverse the value of VRM#2.
(b) Press [JOG DIAL] several times until the jog dial mode display at the right bottom of the
screen changes to "JOG VRM2."
"JOG VRM2."
"JOG VRM2."
"JOG VRM2."
(c) In this status, turn [JOG DIAL] to adjust the line of VRM#2 to the target, and read the
value of VRM#2 to measure the distance to the target.
Caution
●
●
●
● If EBL2 is in floating EBL mode, the center of VRM2 is the fulcrum of EBL2.