Nikko Co Ltd 41TX-49-1 用户手册

1. Slide ON/OFF on bottom of chassis to ON.
2. Use the transmitter’s control levers to steer

your vehicle, as shown at left.

3. Slide ON/OFF on the vehicle to OFF when you

finish driving.

Wheel Alignment
If your vehicle does not drive in a straight 
line when you release the right stick, 
adjust WHEEL ALIGNMENT on bottom of
chassis. Push to L if the vehicle is pulling 
to the right or to R if the vehicle is pulling 
to the left.

Please read this user’s guide before 

installing, setting up and using your new product

www.radioshack.com

©2006.

RadioShack Corporation.

All rights reserved. 

RadioShack and

RadioShack.com are trademarks 
used by

RadioShack Corporation.

60-4456

06A06

Printed in China

This equipment has been tested and found to comply with the limits for a Class 

B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed 

to provide reasonable protection against harmful interference in a residential 

installation. This equipment generates, uses, and can radiate radio frequency 

energy  and,  if  not  installed  and  used  in  accordance  with  the  instructions, 

may cause harmful interference to radio communications. However, there is 

no guarantee that interference will not occur in a particular installation. If this 

equipment  does  cause  harmful  interference  to  radio  or  television  reception, 

which  can  be  determined  by  turning  the  equipment  off  and  on,  the  user  is 

encouraged to try to correct the interference by one or more of the following 

measures: 

•  Reorient or relocate the receiving antenna. 

•  Increase the separation between the equipment and receiver. 

•  Connect the equipment into an outlet on a circuit different from that to 

which the receiver is connected. 

•  Consult your local RadioShack store or an experienced radio/TV technician 

for help. 

If  you  cannot  eliminate  the  interference,  the  FCC  requires  that  you  stop 

using  your  product.  Changes  or  modifications  not  expressly  approved  by 

RadioShack may cause interference and void the user’s authority to operate 

the equipment. 
This device complies with Part 15 of the FCC Rules. Operation is subject to the 

following two conditions: (1) This device may not cause harmful interference, 

and (2) This device must accept any interference received, including interference 

that may cause undesired operation. 
The carrier frequency ....................................................27.145MHz/49.86MHz
Field Strength ...................................................................<80 dBµV/m at 3m
Only use the antenna supplied with this product.
This radiocommunication device complies with all the requirements of Industry 

Canada Standard RSS-310. 

Ce  dispositif  de  radiocommunication  rencontre  toutes  les  exigences  de  la 

norme CNR-310 d’Industrie Canada.

This product is warranted by RadioShack against manufacturing defects in material 

and workmanship under normal use for ninety (90) days from the date of purchase 

from RadioShack company-owned stores and authorized RadioShack franchisees 

and dealers. For complete warranty details and exclusions, check with your local 

RadioShack store.

RadioShack Customer Relations

300 RadioShack Circle, Fort Worth, TX 76102   

                           04/04

•  Do not use your vehicle near devices with transmitters

using the same frequency (27 or 49 MHz). 

•  If someone uses a CB nearby, it might interfere with the 

control of your vehicle. If this happens, move the vehicle

away from the CB.

•  Never play with the vehicle in the street.
•  Be careful when you use the vehicle to avoid high-impact 

collisions with people and objects.

Insert one 9V battery (not supplied) in the battery 
compartment matching the polarity symbols
(+ and -) marked inside.

Turn off your vehicle. Insert six AA alkaline 
batteries (not supplied) in the battery compartment 
matching the polarity symbols (+ and -) marked 
inside.

•  If you do not plan to use your vehicle for a week or more, remove the batteries. Batteries can leak 

chemicals that may damage electronic parts.

•  Dispose of old batteries promptly and properly. Do not burn or bury them.
•  Use only fresh batteries of the required size and recommended type.
•  Do not mix old and new batteries, or batteries with different capacities or different chemistries.
•  If your vehicle does not respond, drives slowly, or the range reduces, replace the batteries in your 

vehicle.

2

Screw each

antenna into its

transmitter. Extend

to full height during 

use.

1

Thread each

vehicle’s antenna

wire through the 

supplied antenna

tube. Then, insert the

tube into the antenna

tube holder on the

vehicle’s body.

60-4456 A3 edited.indd   1

06/19/2006   17:06:06