Rothenbuhler Engineering Company Inc 1673-1 用户手册
1673 OPERATION MANUAL REV A
37
4.2.13.
To manually check status, press the STATUS switch at any time. The updated status of
the SELECTED Remotes will be reported on the Controller panel. You may alternately press
DISARM and STATUS until all Remotes have reported they are confirmed READY.
DISARM and STATUS until all Remotes have reported they are confirmed READY.
4.2.14.
With all deployed Remote Units having reported steady READY status, deactivate the
Controller by pressing the OFF switch.
4.2.15.
Remove the Controller Unit’s enable key.
4.2.16.
Wait an additional 2 minutes, and following standard safety procedures, you may
approach and retrieve the Remote Units.
4.2.17.
Turn OFF the Remote Units. Retract the Antennas and remove and store the enable
keys, and shock tube tips.
4.2.18.
Inspect all units for physical damage. Restore the dust caps and close the lids.