Tecom Co Ltd BT3061A 用户手册

Bluetooth Headset User Manual (BT3061a) 

1. Getting 

Started 

Charge the headset using the adapter. It takes 2 to 2.5 hours to fully recharge the 

battery 

2. Pairing 

Press and hold the ON/OFF button until you hear two short low tones. 

The headset indicator light flashes green and red, indicating the pairing mode is 

on. 

The default ID Code is “1111”. 

3.  Turn the headset on 

Press and hold the ON/OFF button until you hear a short tone. 

The headset indicator light flashes green, indicating the pairing mode is on. If the 

battery is low, the light flashes red. 

4.  Turn the headset off 

      Press and hold the button key until you hear a short low tone following a short 

high tone. 

      The headset indicator light is switched off. 

5.  Adjusting the volume 

To increase the volume, press the “+” button 

To decrease the volume, press the “-“ button 

6.  Making a call 

Enter the number on the mobile keypad. 

When the call has been set up, the voice will be transferred to headset. 

End the call by pressing the ON/OFF button. 

7. Answering 

calls 

When the headset rings, press the ON/OFF button. 

End the call by pressing the ON/OFF button.