3Com Corporation 3CRWE50194 用户手册
14
C
HAPTER
3: B
ASIC
I
NSTALLATION
Figure 8 Connecting the Gateway to an Ethernet Network
Powering Up
1 Plug the included power adapter into the power
adapter socket located on the back panel of the
gateway (see “Power Adapter Socket” on page 9).
gateway (see “Power Adapter Socket” on page 9).
2 Plug the other end into a standard electrical wall
socket.
The gateway will power up, and the Power indicator
light on the front panel will illuminate (see “Power” on
page 8).
light on the front panel will illuminate (see “Power” on
page 8).
System Settings for Your Computer(s)
Each of the computers on your home network needs to
have settings in its TCP/IP control panel adjusted to take
advantage of the gateway.
have settings in its TCP/IP control panel adjusted to take
advantage of the gateway.
Wireless Network Settings
After you have set up your gateway for use with your home
network and your Internet connection, set up your
notebook computer(s) for wireless communication with the
gateway using the following procedure:
network and your Internet connection, set up your
notebook computer(s) for wireless communication with the
gateway using the following procedure: