Sennheiser Electronic Corp CDHDKB 用户手册
Using the headset system
26
Ending a call
왘
Disconnect the wireless link between headset and base station (see
page 23).
page 23).
If a handset lifter/electronic hook switch is used, the call is automati-
cally ended.
cally ended.
If
no
handset lifter/electronic hook switch is used:
왘
Hang up the handset or press the “end call” button on your fixed line
phone.
phone.
Transferring a call from the headset to the fixed line phone and vice versa
This function is only available if no handset lifter/electronic hook switch is
used or if your fixed line phone supports this function.
used or if your fixed line phone supports this function.
If a wireless link is established (see page 23):
왘
Speak into the headset.
If no wireless link is established (see page 23):
왘
Speak into the handset.
Calling via the PC using the headset
Accepting an incoming PC call
If you receive a call on your softphone:
왘
Establish a wireless link between headset and base station (see
page 23).
page 23).
왘
Accept the call using your softphone. If the call control function of
your softphone is supported, the call is automatically accepted
(see page 15).
your softphone is supported, the call is automatically accepted
(see page 15).
If you receive a call and if the call control function of your softphone
is supported by the
is supported by the
HeadSetup
software (see page 15), you hear a
ring tone in the headset and the LED of the PC button
flashed
white.