Sennheiser Electronic Corp CDHDKB 用户手册
29
Using the headset system
Muting the headset’s microphone
To mute the headset’s microphone
during
on the
base station lights up blue):
왘
The microphone is muted. While the microphone is muted, you hear a
beep in the headset every 5 seconds and the LINK LED
beep in the headset every 5 seconds and the LINK LED
on the base
station flashes red.
To unmute the headset’s microphone:
왘
again.
You hear a low confirmation beep in the headset.
or
왘
Disconnect the wireless link between headset and base station (see
page 23).
page 23).
In both cases, the muting is canceled and the LINK LED
lights up blue
again.
Using the advanced functions
Pairing additional headsets for shared use
You can use one DW Office base station with different DW Office headsets.
This can be advantageous if you share a telephone workplace. The last
headset paired to the base station can be used without more ado.
This can be advantageous if you share a telephone workplace. The last
headset paired to the base station can be used without more ado.
If
no
wireless link is established between headset and base station:
왘
Place the additional headset into the magnetic holder of the base
station.
During pairing of the headset to the base station, the HEADSET LED
station.
During pairing of the headset to the base station, the HEADSET LED
flashes blue/red. If pairing was successful, the HEADSET LED
lights
up blue. You can now use the newly paired headset.
Holding a conference call
The headset system allows you to hold a conference call with up to 4 head-
sets. The master headset is used to control the conference call and up to
3 additional guest headsets can participate in the conference call.
sets. The master headset is used to control the conference call and up to
3 additional guest headsets can participate in the conference call.
5
MASTER
GUEST