Sennheiser Electronic Corp XSWSK 用户手册

Using the 

XS WIRELESS systems

XS WIRELESS 

| 9

Using the 

XS WIRELESS systems 

Switching the receiver on/off

To switch the receiver 

on

:

왘

Press the standby button   

1

. The receiver switches on, the display panel is backlit.

왘

Check the RF signal level “

RF

” 

H

 on the receiver’s display panel.

– The RF signal level is not displayed: The receiver frequency is unused. You can put

your transmitter into operation.

– The RF signal level is displayed: The receiver frequency is already used. Read the

chapter “Selecting and changing a receiver channel”.

To switch the receiver to 

standby

 mode:

왘

Keep the standby button   

1

 pressed until “OFF” appears on the display panel.

To completely switch the receiver 

off

:

왘

Disconnect the receiver from the mains by unplugging the mains unit from the wall
socket.

Switching the transmitters on/off

To switch the transmitters on:

왘

Press the ON/OFF button  . The 

power 

LED lights up red, the display panel switches on.

To switch the transmitters off:

왘

Keep the ON/OFF button   pressed until “OFF” appears on the display panel.

OFF

615.

375