Checkpoint Systems Inc. LIB24TZ 用户手册
Classic Street Installation Manual
Rev. *60
21 of 28
Primary antenna (PSB) wiring
Step 1: Open the base cover(s).
Step 2: Cut, strip and terminate the RG59 coax cable, then plug it to the coupler board. Check the
coupler board jumper settings (see igure 14 PSB Coupler Board Jumper Settings).
Step 3: Connect the SSB Lights/Sounder Cable wires for the lights to the J41 on the electronic
reader board (TR4215).
Step 4: Connect the SSB Lights/Sounder Cable wires for the sounder to J54 on the electronic
reader board (TR4215).
Step 5: Connect 24v DC power cable to the VDC power filter and then the output of the filter
board to J18 on the electronic reader board (TR4215).
Step 6: Inspect wiring and connections, confirm coupler board jumper settings (see igure 14 PSB
Coupler Board Jumper Settings).
Step 7: Put the base cover(s) back and secure.
Figure 14 PSB Coupler Board Jumper Settings