Ritron RIT17-445 用户手册
DTX-445 SPECIFICATIONS
GENERAL
FCC ID: AIERIT17-445
IC ID:
1084A-RIT17445
FCC Rule Parts: 90
IC Rule Parts:
RSS-119
Frequency Range:
400.6 – 416.5*, 411 – 429*, or 450 - 470 MHz
RF Channels:
8 Independent TX/RX frequencies
Frequencies unusable in 406.6 – 416.5 MHz band:
None- all 6.25 kHz steps available
Frequencies unusable
RX TX
in 411 - 429 MHz band
417.60000 417.58750
418.03750 417.59375
Unusable 6.25 kHz steps:
418.04375 417.60625
418.05625 417.61250
418.06250
Frequencies unusable
RX TX
in 450 – 470 MHz band
460.80000 460.78750
461.23750 460.79375
Unusable 6.25 kHz steps:
461.24375 460.80625
461.25625 460.81250
461.26250
Frequency Stability:
+/-1.5 PPM (-30
° to +60° C)
Tone/Code Signaling:
CTCSS (Quiet Call) and DCS
Power Supply:
9 to 17 VDC
Current Drain:
RX Standby:
23 mA at 12.5 VDC
Transmit:
1.8 Amp @ 8 Watts at 12.5 VDC
Transmit:
1.8 Amp @ 10 Watts at 14 VDC
Dimensions & weight:
Board only version:
4.75” x 2.8”x .625” 2.1 oz
Shielded version:
4.75” x 2.8”x .625” 3.4 oz.
Encased version:
5.7” x 3” x 1.375”
7.3 oz.
Antenna Fitting:
BNC female with encased version. Other options available on board only version.
Transmitter Duty Cycle:
With supply below 13.5 volts:
8 W board only model - 100 % with added heat sink** maintained at 25
° C
8 W encased model - 33 % with case end cap*** maintained at 25
° C
5 W encased model - 50 % with case end cap*** maintained at 25
° C
(with heat sink or case end cap above 25
° C, degrades linearly to 0% at 60° C)
* pending model
** a heatsink can be added to the board only versions using the two holes next to the RF PA shield.
*** case end cap refers to aluminum extrusion end cap on opposite side from connectors.
8