Ritron RIT38-456 用户手册
6 Series OUTPOST
®
Wireless Callbox
Basic Operation
Have questions? Call 800-USA-1-USA (800-872-1872) or visit our website at www.ritron.com
1
6
S
ERIES
O
UTPOST
®
C
ALLBOX
M
ODELS
...................................................
VHF MODELS
RQX-156 ................ VHF Basic Callbox
RQX-156-XT .......... VHF Vandal-Resistant XT Callbox
RQX-156-XT .......... VHF Vandal-Resistant XT Callbox
RQX-156-XT-KP .... VHF Vandal-Resistant XT Callbox with Keypad
UHF MODELS
RQX-456 ................ UHF Basic Callbox
RQX-456-XT .......... UHF Vandal-Resistant XT Callbox
RQX-456-XT .......... UHF Vandal-Resistant XT Callbox
RQX-456-XT-KP .... UHF Vandal-Resistant XT Callbox with Keypad
The model number appears on the serial label located on the back of the basic
Callbox enclosure. On XT models the standard enclosure is located inside the
fiberglass reinforced vandal-resistant box.
VHF radios are designed to operate within the 15 MHz band between factory standard 150 and 165 MHz.
UHF radios are designed to operate within the 20 MHz band between factory standard 450 and 470 MHz.
OPTIONAL ACCESSORY EQUIPMENT
OPTIONAL ACCESSORY EQUIPMENT
Several options are available for the Ritron 6 Series OUTPOST® Callbox. These options, individually, or in combination with one
another can greatly enhance the functionality of the callbox as well as the overall communication system. Available options
include:
another can greatly enhance the functionality of the callbox as well as the overall communication system. Available options
include:
Entry Keypad
– RQX-156-XT-KP and RQX-456-XT-KP “keypad versions” of the 6 Series Outpost callbox are available to
allow local access with up to 500 unique codes. This version hosts a 2x6 DTMF keypad mechanically mounted to the stainless
steel faceplate.
steel faceplate.
RSS-100 - The RSS-100 is a complete solar power supply system consisting of a 10-watt solar panel, charge controller and 8
AH rechargeable battery all housed in a rugged, ready-to-mount enclosure.
AH rechargeable battery all housed in a rugged, ready-to-mount enclosure.
R-STROBE - The R-STROBE is a powerful strobe light, giving a visual indication of a callbox in use. The R-STROBE is
available in both AC (R-STROBE) and DC versions (R-STROBE-DC).
available in both AC (R-STROBE) and DC versions (R-STROBE-DC).
RCIM-1000 - The RCIM-1000 MDC-1200 encoder board allows each callbox to be assigned a unique unit ID number.
GGT-1 - The GGT-1 DTMF decoder/relay board allows remote control of the on-board relay (e.g. Gateguard
®
operation) with a
DTMF keypad equipped radio.
RQX-XTMK
– The RQX-XTMK is a mounting plate used to mount the XT callbox to most flat surfaces.
RQX-XTMK-GN
– The RQX-XTMK-GN is a mounting bracket used to mount the XT callbox to an industry standard gooseneck
post.
brochure.
XT Callbox with Keypad
RQX-XTMK-GN
RSS-100
R-STROBE
Basic Callbox
XT Callbox