Honeywell International Inc. 9PGTPL-100A 用户手册
Page 1014
1 Mar 2006
34-45-54
MAINTENANCE MANUAL
TPL-100A Processor / Part No. 940-0530-001
Use or disclosure of information on this page is subject to the restrictions in the proprietary notice of this document.
(5) Unit, System, and Input Active Fault Relationship
Table 1007 shows the relation in unit, system, input active faults, and the status on the
display. The asterisk (*) shows that the text is selectable.
display. The asterisk (*) shows that the text is selectable.
The display screen shows START TEST or TEST INHIBIT. See Figure 1004. The
test is prevented in specific conditions when the Air/Ground Discrete = Air. When the
Air/Ground Discrete = Ground, START TEST is shown.
test is prevented in specific conditions when the Air/Ground Discrete = Air. When the
Air/Ground Discrete = Ground, START TEST is shown.
Push the Select button when the caret is adjacent to the Start Test selectable item to
show the Test In Progress screen and to start the test.
show the Test In Progress screen and to start the test.
The three possible results of the test are:
(a) No faults (unit and system ok)
(b) System or input faults (unit ok, system failed)
(c) Internal faults (unit failed/system failed).
Push the Select button with the caret at SYSTEM FAILED or UNIT FAILED to show a
screen with the entries that include the applicable found faults. When faults are
found, START TEST is selectable and a retest is possible. The selection of GO
BACK causes the previous screen with a selectable item to be shown. That previous
screen is the same as it was when previously visited. A GO BACK is possible when
the user pushes a Select button with an in-operation selectable item. To go back to
the previous screen, hold the Scroll button and push the Select button.
(a) No faults (unit and system ok)
(b) System or input faults (unit ok, system failed)
(c) Internal faults (unit failed/system failed).
Push the Select button with the caret at SYSTEM FAILED or UNIT FAILED to show a
screen with the entries that include the applicable found faults. When faults are
found, START TEST is selectable and a retest is possible. The selection of GO
BACK causes the previous screen with a selectable item to be shown. That previous
screen is the same as it was when previously visited. A GO BACK is possible when
the user pushes a Select button with an in-operation selectable item. To go back to
the previous screen, hold the Scroll button and push the Select button.
Table 1007. Active Unit, System and Input Faults, and Display Status Indication
Active Unit
Faults
Active System
Faults
Active Input
Faults
Unit (Status)
System/Input
(Status)
No
No
No
Unit OK
System OK
System OK
No
No
Yes
Unit OK
*Inputs Faulted
*Inputs Faulted
No
Yes
No
Unit OK
*System Failed
*System Failed
No
Yes
Yes
Unit OK
*System Failed
*System Failed
Yes
No
No
*Unit Failed
*System Failed
*System Failed
Yes
No
Yes
*Unit Failed
*System Failed
*System Failed
Yes
Yes
No
*Unit Failed
*System Failed
*System Failed
Yes
Yes
Yes
*Unit Failed
*System Failed
*System Failed
* Selectable item