Nokia of America Corporation BBTRX-04 用户手册
Baseband cabinet user space
The user space provided in the Baseband cabinet may be used for installing customer
specified equipment. However, the equipment must have been tested in the 9412 eNodeB
to FCC Part 15 (B) and met Class B requirements. Such an installation is subject to the
non-interference requirements of Section 15.5 and Part 2.953(d) of FCC rules.
specified equipment. However, the equipment must have been tested in the 9412 eNodeB
to FCC Part 15 (B) and met Class B requirements. Such an installation is subject to the
non-interference requirements of Section 15.5 and Part 2.953(d) of FCC rules.
Antenna exposure
Antenna installations for the9412 eNodeB shall be performed in accordance with all
applicable manufacturer's recommendations, and national laws and regulations. To ensure
correct antenna installation, the antenna installer shall perform all necessary calculations
and/or field measurements to evaluate compliance with applicable national laws or
regulations regarding exposure to electromagnetic fields. The supplier of radio
equipment, the supplier of antenna equipment and the integrator and builder of the site
must provide sufficient information so that the limits of the exclusion zones can be
determined. Any changes to the antenna or other equipment in the transmit path may
require re-evaluation of the exposures to electromagnetic fields.
applicable manufacturer's recommendations, and national laws and regulations. To ensure
correct antenna installation, the antenna installer shall perform all necessary calculations
and/or field measurements to evaluate compliance with applicable national laws or
regulations regarding exposure to electromagnetic fields. The supplier of radio
equipment, the supplier of antenna equipment and the integrator and builder of the site
must provide sufficient information so that the limits of the exclusion zones can be
determined. Any changes to the antenna or other equipment in the transmit path may
require re-evaluation of the exposures to electromagnetic fields.
Pursuant to 47 CFR Part 1, Subpart I, subject to the provisions of section 1.1307, all
installations must be evaluated for requirements contained in Table 1, “Limits for
maximum permissible exposure,” in section 1.1310.
installations must be evaluated for requirements contained in Table 1, “Limits for
maximum permissible exposure,” in section 1.1310.
Packaging collection and recovery requirements
Countries, states, localities, or other jurisdictions may require that systems be established
for the return and/or collection of packaging waste from the consumer, or other end user,
or from the waste stream. Additionally, reuse, recovery, and/or recycling targets for the
return and/or collection of the packaging waste may be established.
for the return and/or collection of packaging waste from the consumer, or other end user,
or from the waste stream. Additionally, reuse, recovery, and/or recycling targets for the
return and/or collection of the packaging waste may be established.
For more information regarding collection and recovery of packaging and packaging
waste within specific jurisdictions, please contact the Alcatel-Lucent Services -
Environmental Health and Safety organization. For installations not performed by
Alcatel-Lucent Technologies, please contact the Alcatel-Lucent Customer Support Center
at:
waste within specific jurisdictions, please contact the Alcatel-Lucent Services -
Environmental Health and Safety organization. For installations not performed by
Alcatel-Lucent Technologies, please contact the Alcatel-Lucent Customer Support Center
at:
Technical Support Services, within the United States: +1 630 224 4762, prompt 2
Product conformance statements
United States
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
C-12
Alcatel-Lucent – Internal
Proprietary – Use pursuant to Company instruction
9412 eNB Compact
418-000-415
Issue 4.1
August 2011