JVC KENWOOD Corporation J7V004 用户手册

© 2007 Victor Company of Japan, Limited

Printed in China

LNT0097-001A

This device complies with Part 15 of the FCC Rules. Operation is subject to the 

following two conditions:

(1) This device may not cause harmful interference

(2) This device must accept any interference received, including interference that 

may cause undesired operation.

CAUTION: Changes or modifications not approved by JVC could void user’s 

authority to operate the equipment.

Address: JVC 

AMERICAS 

CORP.

 

JVC COMPANY OF AMERICA

 

1700 Valley Road, Wayne, N.J. 07470

Telephone:  1 (800) 252-5722

Note: This equipment has been tested and found to comply with the limits for 

a Class B digital device, pursuant to Part 15 of the FCC rules. These limits 

are designed to provide reasonable protection against harmful interference 

in a residential installation. This equipment generates, uses and can radiate 

radio frequency energy and, if not installed and used in accordance with the 

instructions, it may cause harmful interference to radio communications. 

However, there is no guarantee that interference will not occur in a particular 

installation. If this equipment does cause harmful interference to radio or 

television reception, which can be determined by turning the equipment off and 

on, the user is encouraged to try to correct the interference by one or more of the 

following measures:

•  Reorient or relocate the receiving antenna.

•  Increase the separation between the equipment and receiver.

•  Connect the equipment into an outlet on a circuit different from that to which the 

receiver is connected.

•  Consult the dealer or an experienced radio/TV technician for help.

This device complies with RSS-210 of the IC Rules. Operation is subject to the 

following two conditions:

(1) This device may not cause harmful interference

(2) This device must accept any interference received, including interference that 

may cause undesired operation of the device.

CAUTION: Changes or modifications not approved by JVC could void user’s 

authority to operate the equipment.

Address: 

JVC CANADA INC.

 

21 Finchdene Square, Toronto, ON  M1X 1A7

Telephone: (416) 293-1311

e-mail: info@jvc.ca

Note: This equipment has been tested and found to comply with the limits for 

a Class B digital device, pursuant to Industry Canada’s RSS-210. These limits 

are designed to provide reasonable protection against harmful interference 

in a residential installation. This equipment generates, uses and can radiate 

radio frequency energy and, if not installed and used in accordance with the 

instructions, it may cause harmful interference to radio communications. 

However, there is no guarantee that interference will not occur in a particular 

installation. If this equipment does cause harmful interference to radio or 

television reception, which can be determined by turning the equipment off and 

on, the user is encouraged to try to correct the interference by one or more of the 

following measures:

•  Reorient or relocate the receiving antenna.

•  Increase the separation between the equipment and receiver.

•  Connect the equipment into an outlet on a circuit different from that to which the 

receiver is connected.

•  Consult the dealer or an experienced radio/TV technician for help.

Cet appareil est conforme à la RSS-210 du réglement de la IC. Le fonctionnement 

est sujet aux deux conditions suivantes:

(1) Cet appareil ne peut causer d’interférences nuisi-bles

(2) Cet appareil reçoit toute interférence même les interférences qui peuvent 

occasioner un mauvais fonctionnement.

ATTENTION: Les changements ou les modifications non approuvés par JVC 

risquent de retirer à l’utilisateur le droit d’utiliser l’appareil.

Adresse: JVC CANADA INC.

 

21 Finchdene Square, Toronto, ON M1X 1A7

Téléphone: (416) 293-1311

e-mail: info@jvc.ca

Remarque: L’appareil a été testé et jugé conforme aux limites des appareils 

numériques de classe B, aux termes de la réglementation RSS-210 de l’industrie 

du Canada. Ces limites ont pour but d’assurer une protection raisonnable contre 

les interférences parasites lorsque l’appareil est utilisé dans une installation 

résidentielle. Cet appareil engendre, utilise et peut émettre une énergie 

radioélectrique et, s’il n’est pas installé et utilisé en stricte conformité avec ces 

instructions, il peut provoquer des interférences parasites dans les liaisons 

radiophoniques. Ceci ne garantit pas pour autant qu’une installation particulière 

n’émettra aucune interférence. Si l’appareil engendre des interférences parasites 

avec la réception radio ou télévision, ce qui pourra être déterminé en éteignant 

puis en rallumant l’appareil, il est conseillé à l’utilisateur d’essayer de corriger les 

interférences en prenant l’une des mesures ci-dessous:

•  Modifier l’orientation ou changer l’emplacement de l’antenne de réception.

•  Eloigner davantage l’appareil du récepteur.

•  Brancher l’appareil dans une prise d’un circuit différent de celui auquel le 

récepteur est raccordé.

•  Demander l’aide de son agent ou d’un technicien radio/télévision qualifié.

This product’s performance would be degraded under a strong electro-static 

environment. And the function would be self-recoverable after the above case.

This product’s performance would be degraded since the disturbance from the mains 

cord. And the function would be self-recoverable after the above case.

Les performances de ce produit se détérioreront dans un environnement fortement 

électro-statique. Par ailleurs, le fonctionnement se restaurera de lui-même dans le 

cas ci-dessus.

Les performances de ce produit se détérioreront en cas de perturbations du cordon 

d’alimentation. Par ailleurs, le fonctionnement se restaurera de lui-même dans le cas 

ci-dessus.

El rendimiento de este producto puede deteriorarse en un entorno con campos 

electrostáticos fuertes. El funcionamiento se repondrá a la normalidad después del 

caso arriba mencionado.

El rendimiento de este producto puede deteriorarse debido a las perturbaciones del 

cable de la red eléctrica. El funcionamiento se repondrá a la normalidad después del 

caso arriba mencionado.

iPod Connection terminal

LED indicator

While pairing

Blue

●-●-●-●-●-●-●-●-●-●-●-●-●-

Connecting

Blue

●-●-●--------------●-●-●----------

Communicating

Blue

●---------------------●-----------------

●  Never use the headphones when driving 

a car, motorcycle, or bicycle. This could 
result in an accident. 

●  Pay special attention to traffic around 

you when using the headphones outside. 
Failure to do so could result in an 
accident.

●  Be careful not to turn up the sound 

volume too high. Your hearing can 
be damaged by listening to sounds at 
excessive volume for long periods.

●  Do not disassemble or modify the 

transmitter.

●  Do not allow flammable, water or 

metallic objects to enter the transmitter.

●  In the dry air such as in winter, you 

may feel a static shock when using the 
transmitter.

●  in places subject to excessive humidity or 

dust

●  in places subject to extremely high (over 

40°C or 104°F) or low  (under 0°C or 
32°F) temperatures

●  exposed to direct sunlight
●  near a heater

●  allow them to get wet
●  shake them or drop them against hard 

objects

●  insert forcibly when connecting the unit; 

otherwise the unit and the connected 
device may be damaged.

●  apply excessive force to the unit when 

connected; otherwise the unit and the 
connected device may be damaged.

●  touch the terminals of the unit and the 

connected device or contact metallic 
object to them; otherwise damage or 
malfunction may be caused with poor 
contact or a static shock.

●  IF THE IPOD DOES NOT PLAY 

CORRECTLY, PLEASE UPDATE YOUR 
IPOD SOFTWARE TO THE LATEST 
VERSION. FOR DETAILS ABOUT 
UPDATING YOUR IPOD, CHECK ON 
THE APPLE WEB SITE.
<http://www.apple.com>

●  SOUND DISTORTION MAY OCCUR 

WHEN PLAYING BACK AUDIO 
SOURCE WITH HIGH RECORDING 
LEVELS. WHEN DISTORTION 
OCCURS, IT IS RECOMMENDED 
TO TURN OFF THE EQUALIZER OF 
THE IPOD. FOR INFORMATION ON 
OPERATING THE IPOD, SEE THE 
IPOD INSTRUCTION MANUAL.

●  JVC IS NOT RESPONSIBLE FOR ANY 

LOSS OF OR DAMAGE TO IPOD 
THAT MIGHT RESULT FROM THE 
USE OF THIS PRODUCT.

Thank you for purchasing this JVC product.
Before you begin operating this unit, please read the operating instructions carefully to be sure 
you get the best possible performance.
If you have any questions, consult your JVC dealer.

You can register up to 8 Bluetooth devices to 
the unit.
•  The device that has the oldest last connection 

date will be overwritten when you register the 
9th Bluetooth device.

Before pairing...
•  Turn off the iPod.
•  Place the target Bluetooth device within 1 m 

of the unit.

The LED indicator starts flashing rapidly. 

2 Turn on the target Bluetooth 

The unit automatically starts pairing and the 
flash will become slower after the pairing 
completed.

Preparation: 
•  Finish pairing between the unit and the 

Bluetooth device.

•  Connect the unit to the iPod.

2  Turn on the Bluetooth device.

The unit automatically turns on and will 
connect to the target Bluetooth device.

Refer to the iPod’s instruction manual for 
the operation of the iPod.
• If 

the 

target 

Bluetooth device supports 

the AVRCP of the Bluetooth Profile, 
play, pause and search (forward/reverse) 
functions are available from the target 
Bluetooth device.

To stop using the unit, 
Turn off the iPod and disconnect the unit.

This unit is a stereo transmitter using Bluetooth® wireless technology.

Compatible iPods
● iPod (with click wheel, with color display, with video)
● iPod mini
● iPod nano (1st generation, 2nd generation (aluminum))
•  Do not connect the unit to devices other than above. Otherwise, mulfunctions may occur on the 

unit or the devices.

•  This unit does not support iPod 3rd generation.

Control

Music

with iPod

Bluetooth is a short-range wireless radio 
communication technology for the mobile 
device such as cellular phones, portable PCs, 
and other devices. The Bluetooth devices can 
be connected without cables and communicate 
each other.

Bluetooth Profile designates the way of 
communication between Bluetooth devices. 
The system supports the following Bluetooth 
Profiles.
A2DP: Advanced Audio Distribution Profile
The profile controls sending/receiving the high-
quality audio contents.
AVRCP: Audio/Video Remote Control Profile
The profile controls the functions of audio/
video devices such as playing, stopping, pausing 
and volume control.

Pairing creates a unique and encrypted link 
between two Bluetooth devices and lets them 
communicate with each other. Bluetooth devices 
will not work if the devices have not been 
paired.

•  Microwaves emitted from Bluetooth devices 

may affect the operation of electronic 
medical devices. Turn off this unit and other 
Bluetooth devices in hospitals, airplanes, 
trains, or crowding places.

•  Bluetooth devices use 2.4 GHz band, which 

is the same as that used by wireless LAN 
devices and microwave oven. Interference 
may occur near these devices and cause 
noise, disconnectivity, or a decrease of 
communication speed.

•  Connection with all Bluetooth devices cannot 

be guaranteed. Connectivity, operation, 
display indication or function may differ 
depending on the characteristics and 
specification of the devices.

• Some Bluetooth devices take more time to 

establish connection.

•  To use the Bluetooth functions, the Bluetooth 

devices are required to be compatible with 
the same Bluetooth profiles as this unit is. 
However, the functions may differ depending 
on the specifications of the Bluetooth device 
even when it is compatible with the same 
profiles.

What appears to be trouble is not always 
serious. Check the following points before 
consult your JVC dealer.

Cannot pair the devices.
☞ You cannot pair the Bluetooth device having 

sending function only.

☞ Bring the devices as closer as possible.
Cannot connect the devices.
☞ Pairing is incomplete. Perform the pairing 

again.

The sound is intermittent/The 
communication range is small.
☞ Although Bluetooth wireless technology 

can transmit the contents within the range 
of approx. 10 m, obstacles (human bodies, 
metallic objects, wall, etc.) or radiowave 
condition may affect the sound and decrease 
its range.

☞ The sound may be intermittent in the 

following cases. Avoid the following 
conditions when you use this unit.

–  Places where the wireless local area 

network is applied.

–  Near the microwave oven.
– Near the other Bluetooth devices.
–  Places where the radiowave is used.

No sound.
☞ The connection between the Bluetooth device 

and this unit is incomplete. Connect the 
devices again.

Compatible iPods:
iPod (with click wheel, with color display, with 
video), iPod mini, iPod nano (1st generation, 
2nd generation (aluminum))
Bluetooth version:
Bluetooth 2.0 certified
Output power:
Bluetooth power class 2
Service area:
max. 10 m (10.9 yd.) (approx.)*
*  Communication range may vary depending 

on the environmental conditions.

Frequency band:
2.4 GHz (2,4000 GHz - 2,4835 GHz) 
Bluetooth profile:
A2DP (Advanced Audio Distribution Profile) 
AVRCP (Audio/Video Remote Control Profile)
Supported Codec:
SBC

Power supply:
supplied from iPod
Battery life**:
max. XXX hours
Standby time: max. XXX hours
** Depends on use or the type of the iPod 

connected

Mass:
6 g (0.21 oz.)

● iPod is a trademark of Apple Inc., registered 

in the U.S. and other countries.

● The Bluetooth® word mark and logos are 

registered trademarks owned by Bluetooth 
SIG, Inc. and any use of such marks by Victor 
Company of Japan, Limited (JVC) is under 
license. Other trademarks and trade names 
are those of their respective owners.

BT_transmitter_J.indd   1

BT_transmitter_J.indd   1

07.8.2   10:48:44 AM

07.8.2   10:48:44 AM