JVC KENWOOD Corporation V5X004 用户手册
Confidential for JVC company of Japan Limited.
to operate this device."
1.2 Basic Features
- Secure, wide band, scrambled digital wireless link in the world-wide license
exempt 2400-2483.5 MHz ISM-band
- The module is a reconfigurable platform and can host many applications,
including features such as automated TX/RX swapping
- Optimal digital audio performance:
Up to 4 stereo uncompressed audio channels (44.1ksps. 48ksps or
96ksps, 16 or 24bit)
96ksps, 16 or 24bit)
or optional proprietary low latency compression algorithm
Tight inter-speaker synchronization
Active TX-RX audio clock synchronization
Low latency (configurable from 10…20ms) to support e.g. lip-synced
applications
applications
Bi-directional data channel for metadata or control data (up to
100kbps)
100kbps)
Simultaneous I
2
S and S/PDIF input/output (incl. S/PDIF detection)
Programmable digital audio gain
Soft audio muting under poor link circumstances
Sample rate converter, including automatic sample rate detection, to
support 32ksps, 44.1sps and 48ksps with a single audio crystal
support 32ksps, 44.1sps and 48ksps with a single audio crystal
- Optimal wireless coexistence and robustness:
Advanced dedicated base band controller to provide an optimal level of
coexistence with all kinds of other wireless applications (e.g. WLAN,
BT, MWO, GSM, DECT)
coexistence with all kinds of other wireless applications (e.g. WLAN,
BT, MWO, GSM, DECT)
Automatic frequency allocation with seamless RF channel switching
WLAN sniffer continuously for enhanced WLAN co-existence
- Optimal wireless performance:
In-room or multi-room usage (point to multi-point is also supported)
Indoor range of up to 50m
Automatically controlled receiver/transmitter antenna spatial
diversity minimizes fading and multipath effects
diversity minimizes fading and multipath effects
- Other features:
Wireless S/PDIF data pipe application to support e.g. wireless DTS
Wirelessly accessible registers (e.g. RF channel switching, audio
volume) and GPIO (e.g. use control switched and LED indicators)
volume) and GPIO (e.g. use control switched and LED indicators)