Raytheon Anschuetz GmbH High Seas Products NSX-30U 用户手册
Synapsis Radar
with Nautoscan NX Pedestal
Operator Manual
Edition Sep 2015
2-189
4265.DOC020102
2.7.2
Select T-SCE (ON/OFF)
This function allows you to call up the TEST SCENARIO.
The Test scenario is described by an independent Radar video, in which the
test targets are displayed.
If the Test Scenario has been activated, this is indicated by flashing S
characters shown at the bottom of the PPI.
This function allows you to call up the TEST SCENARIO.
The Test scenario is described by an independent Radar video, in which the
test targets are displayed.
If the Test Scenario has been activated, this is indicated by flashing S
characters shown at the bottom of the PPI.
Operator controls
Task
Step 1 Open the FUNC menu.
Step 2 Select the T-SCE ON/OFF symbol button. After
several cycles, the test scenario appears on the PPI.
These targets can be acquired manually or using the
ARPA zones. The corresponding target information can
be read out using the ARPA INFO.
several cycles, the test scenario appears on the PPI.
These targets can be acquired manually or using the
ARPA zones. The corresponding target information can
be read out using the ARPA INFO.
Result:
This test allows the ARPA tracker to be tested. The test
is normally carried out in open waters. Activating T-SCE
displays an artificial Radar video containing several
targets. These targets can be acquired manually or using
acquisition zones.
Each target acquired can be identified by the ARPA
INFO.
The VECTORS, TRAILS and PAST POSITIONS for the
targets can also be shown.
is normally carried out in open waters. Activating T-SCE
displays an artificial Radar video containing several
targets. These targets can be acquired manually or using
acquisition zones.
Each target acquired can be identified by the ARPA
INFO.
The VECTORS, TRAILS and PAST POSITIONS for the
targets can also be shown.