Raytheon Anschuetz GmbH High Seas Products NSX-30U 用户手册
Synapsis Radar
with Nautoscan NX Pedestal
Operator Manual
with Nautoscan NX Pedestal
Operator Manual
4265.DOC020102
2-10
Edition Sep 2015
Operator controls
Text identifier
Editing marks
Drag and drop.
Pick up:
Position the cursor on the zone and press the right
trackball button. The zone is shown in a dotted form,
editing markers are shown at the corners. Position the
cursor on the desired marker. Press and hold the right
trackball button. Drag the marker to the desired position.
trackball button. The zone is shown in a dotted form,
editing markers are shown at the corners. Position the
cursor on the desired marker. Press and hold the right
trackball button. Drag the marker to the desired position.
Drop:
Press once the right trackball button. The change is
completed; the zone switches from dotted to continuous
form.
completed; the zone switches from dotted to continuous
form.
2.1.4.2
Soft Buttons
This chapter describes the main soft button functions.
This chapter describes the main soft button functions.
Displays the active heading sensor, the color indicates
the sensor quality.
the sensor quality.
RED for invalid, ORANGE for doubtful, BLACK for good
(corresponding to IEC 62288 edition 1) or ORANGE for
invalid, YELLOW for doubtful, BLACK for good
(corresponding to IEC 62288 edition 2).
(corresponding to IEC 62288 edition 1) or ORANGE for
invalid, YELLOW for doubtful, BLACK for good
(corresponding to IEC 62288 edition 2).
The BLACK color depends on the color palette selection.
Pressing the soft button the function display shows the
available heading sensors.
Pressing the soft button the function display shows the
available heading sensors.
Displays the actual CCRS selection mode, Sensor Mode
AUTO for automatic sensor selection, Sensor Mode
MAN for manual sensor selection.
AUTO for automatic sensor selection, Sensor Mode
MAN for manual sensor selection.