E F Johnson Company 2425795 用户手册
6-10
Viking™ VP600 Portable Radio Operating Manual
SmartNet / SmartZone / P25 Trunked Features
- If after five tries the message is not acknowledged, a tone sounds and “Msg Failed” is
displayed.
Note
Only the message number assigned to the alias is sent – not the actual text of the alias. For
example, if MSG 1 is assigned to alias “In Service”, “MSG 1” is sent – not “In Service”.
example, if MSG 1 is assigned to alias “In Service”, “MSG 1” is sent – not “In Service”.
6.7
Sending Status Conditions
The status feature allows the user to send his/her current status to the dispatcher. Up to 255
status conditions, identified by an alias, can be pre programmed. If the Status option
button or menu parameter is programmed, status conditions are sent as follows:
status conditions, identified by an alias, can be pre programmed. If the Status option
button or menu parameter is programmed, status conditions are sent as follows:
1 Momentarily press the Status option button or select that menu parameter. The alias of
the current status condition is displayed.
2 To change the current status, press the Up/Down buttons until the desired status is
displayed. Then to send the status, press the
(Menu) button or momentarily press
the PTT switch. One of the following events then occurs:
- If five beeps sound and “Ack Received” is displayed, the status was received and
acknowledged by the system.
- If after five tries the message is not acknowledged, a tone sounds and “Status Fail” is
displayed.
Note
Only the status number assigned to the alias is sent – not the actual text of the status
condition alias itself.
condition alias itself.
6.8
Emergency Alarm and Call
Emergency Alarms and Calls are separate functions that can be individually enabled or
disabled on each SmartNet/SmartZone and P25 Trunked system. The Emergency option
button (or menu parameter) is required for these functions. Other emergency features are
as follows:
disabled on each SmartNet/SmartZone and P25 Trunked system. The Emergency option
button (or menu parameter) is required for these functions. Other emergency features are
as follows:
• Emergency Alarms are transmitted on the selected talkgroup if emergency calls are
disabled, and on the emergency talkgroup if emergency calls are enabled.
• Emergency Call talkgroup selection priority is as follows. For example, if a global
emergency channel is not programmed, the emergency talkgroup of the selected channel
is used.
is used.
- Global (radio wide) emergency channel