Honeywell International Inc. WFSPS 用户手册

SWIFT® Smart Wireless Integrated Fire Technology Manual — P/N LS10036-000NF-E:E 11/9/2017

33

Wireless Devices



To transfer a profile from a gateway/distributor to a module:
1.

Bring the module within 20 feet of the gateway/distributor. 

2.

Insert one or more batteries to power on the module. Ensure the module is in factory default state. If the module is in factory default 

state, the LED blinks red once.

3.

Toggle the state of the tamper condition to instruct the module to request a profile. To toggle the tamper condition state, start with 

the faceplate (with integral magnet) removed.

4.

Quickly replace then remove the faceplate from the module to momentarily activate the magnetic tamper sensor on the module. Do 

not attach the mounting screws for the faceplate during this step. The LED blinks red every half second indicating that it is 

requesting a profile. The green LEDs turn on steady for ten seconds indicating that the profile has been assigned. If the profile is not 

received within 1 minute, the LED blinks red every ten seconds indicating that it has stopped requesting a profile. 

To assign a profile to the device using the SWIFT Tools application, do the following:
1.

Connect the W-USB adapter to your computer. For more information on the USB adapter, refer to Section 5.

2.

Launch the SWIFT Tools application. Refer to Appendix A, “SWIFT Tools” for more information.

3.

From the Home Screen, select the Create Mesh Network function.

4.

Create a new profile or import an existing profile as required. 

5.

Select and open the profile to be assigned to the gateway from the Name drop-down box in the Profile section.  

6.

Power on the device within approximately 20 feet of the laptop running SWIFT Tools.

7.

Ensure that the Scan On selection box is checked.

m

ag

ne

tm

on

.w

m

f

Magnetic 
sensor

assi

gn

pr

ofi

le

_s

el

ect

.jp

g