Honeywell International Inc. WFSRM 用户手册
14
SWIFT™ Smart Wireless Integrated Fire Technology Manual — P/N LS10036-000NF-E:C 5/8/2015
FWSG FlashScan Wireless System Gateway
Mounting and Wiring
2.7.2 Wiring
•
All wiring must be installed in compliance with the National Electrical Code and the local
codes having jurisdiction.
codes having jurisdiction.
•
12-18 AWG is recommended.
For wiring connections:
1. Strip about 3/8” of insulation from the end of the wire.
2. Slide the stripped end of the wire under the appropriate terminal and tighten the screw.
2. Slide the stripped end of the wire under the appropriate terminal and tighten the screw.
Figure 2.4 Attaching Cover to Mounting Plate
2.3
.w
m
f
locating pin
locating pin
locating pin
NOTE: Do not loop the wire under the screw terminals.