Vertex Standard USA Inc. 11133020 用户手册
EVX-531 O
pErating
M
anual
15
a
dvancEd
o
pEratIon
prI-2 s
Et
Press (or press and hold) the assigned programmable
key to toggle the current channel to the priority chan-
nel 2 “enable” and “disable”.
key to toggle the current channel to the priority chan-
nel 2 “enable” and “disable”.
prI-2 d
IsaBlE
Press (or press and hold) the assigned programmable
key to disable the priority channel 2 of the group tem-
porarily.
key to disable the priority channel 2 of the group tem-
porarily.
s
can
The Scanning feature is used to monitor multiple
signals programmed into the transceiver. While scan-
ning, the transceiver will check each channel for the
presence of a signal, and will stop on a channel if a
signal is present.
To activate scanning:
signals programmed into the transceiver. While scan-
ning, the transceiver will check each channel for the
presence of a signal, and will stop on a channel if a
signal is present.
To activate scanning:
Press (or press and hold) the assigned Program-
mable key to activate scanning.
The scanner will search the channels of each
channel, looking for active ones; it will pause
each time it finds a channel on which someone is
speaking.
Press (or press and hold) the assigned Program-
mable key again to disable scanning. Operation
will revert to the programmed revert channel.
Note: Your dealer may have programmed your radio
to stay on one of the following channels if you press
the PTT switch during scanning pause:
to stay on one of the following channels if you press
the PTT switch during scanning pause:
“Scan Pause” channel (“Talk Back”)
“Last Busy” channel
“Priority-2” channel
“User Programmed” channel (“Select Channel”)
The channel which defined in the CH Selector
knob.
FCC ID: AXI11133020
IC: 10239A-11133020