Vertex Standard USA Inc. 11273020 用户手册

Press, (or press and hold), the assigned PF key to activate

the Talk Around feature when you are operating on duplex

channel systems (separate receive and transmit frequen-

cies, utilizing a “repeater” station). The Talk Around

feature allows you to bypass the repeater station and talk

directly to a station that is nearby. This feature has no ef-

fect when you are operating on “simplex” channels, where

the receive and transmit frequencies are already the same.
When the Talk Around feature is activated, the “ ” icon

will be indicated on the display.
Note that your dealer may have mode provision for “Talk

Around” channels by programming “repeater” and “Talk

Around” frequencies on two adjacent channels. If so, the

key may be used for one of the other Pre-Programmed

Functions.
Note: The Talk Around feature does not activate on the

Simplex Channel.

Press (or press and hold) the assigned PF key to reset the

RFC (Ready for Communication) condition.

Press, (or press and hold), the assigned PF key to send a

pre-programmed call signal of the 5-Tone.

Press, (or press and hold), the assigned PF key to select a

2-Tone or 5-Tone encode code from the pre-programmed

encode list.

You can change the desired digit of the 5-Tone encode

code using this function:
r

 Press, (or press and hold), the assigned PF key.

r

 Enter the desired 5-Tone encode code directly from

the [A]/[B] keys (select the code number) and SIDE-

1/SIDE-2 buttons (select the code digit).

r

 Press the [D] key to store the new setting. The display

indicates “-.SET.-” briefly, then reverts to the normal

channel indication.

 You may cancel the new setting by pressing the [C]

key. In this case, the display indicates “-.CANCEL.-”
briefly.

FCC ID: AXI11273020

IC: 10239A-11273020

Vertex Standard LMR, Inc.