ACR Electronics ACR-PLB100 用户手册
Y1-03-0155 Rev. A
12
OPERATING POSITION
FIGURE 6
SECTION 3 - EXTERNAL GPS I/R ADAPTER
3.1
GENERAL
Your unit comes with a GPS cable Plug Adapter that can be interfaced to your
GPS receiver to input actual GPS data into your beacon. This extra data can help
improve reaction time to your position in the event of an emergency. This data is
particularly helpful when the GEOSAR Satellite system picks up the Distress
Alert.
GPS receiver to input actual GPS data into your beacon. This extra data can help
improve reaction time to your position in the event of an emergency. This data is
particularly helpful when the GEOSAR Satellite system picks up the Distress
Alert.
3.2
GPS ADAPTER
3.2.1
Connecting:
Your External GPS I/R cable attaches to your UNIT and the GPS receiver,
forming a Link for data to transfer. (Like a printer) The cable Plug’s into the
socket labeled GPS located at the top of the unit. The other end has two wires that
need to be connected to the GPS Receiver’s Data/Power Cable. Consult your GPS
Manual for wire identification.
forming a Link for data to transfer. (Like a printer) The cable Plug’s into the
socket labeled GPS located at the top of the unit. The other end has two wires that
need to be connected to the GPS Receiver’s Data/Power Cable. Consult your GPS
Manual for wire identification.