Ricoh Company Ltd. PRSP213NW1 用户手册

6.

Enter the access code, and then click [OK].

The default access code is "Admin". Enter "Admin" if it has not been changed. Case is significant.

7.

Click the [IPv6] tab.

8.

Select [Disable] in [IPv6 DHCP:].

9.

Select [Enable] in [IPv6].

10.

Enter values in [Manual address:], [Prefix length:], and [Gateway:], and then click [OK].

11.

Click [Close].

P

Wireless LAN Setup

This section explains how to configure the wireless LAN settings manually using Smart Organizing
Monitor. For easy setup using WPS (Wi-Fi Protected Setup), see Wi-Fi Settings Guide.

Configuring the Infrastructure mode using Smart Organizing Monitor

• Ensure that the router, access point, or device equipped with a wireless LAN, etc., is turned on.
• Check the authentication method and the name of the router, access point, or device equipped

with a wireless LAN (SSID/IBSS) in advance.

1.

On the [Start] menu, click [All Programs].

2.

Click [Smart Organizing Monitor for SP xxx Series].

3.

Click [Smart Organizing Monitor Status].

If the machine you are using is not selected, click [Connect Printer], and then select the machine's
model.

4.

Click the [User Tools] tab.

5.

Click [Printer Configuration].

6.

Enter the access code, and then click [OK].

The default access code is "Admin". Enter "Admin" if it has not been changed. Case is significant.

7.

On the [Network 1] tab, set [Wireless Function:] to [Active].

8.

On the [Wireless] tab, set [Manual Setup] to [Configuration Method].

9.

In [SSID], enter the SSID.

10.

Set [Communication Mode] to [Infrastructure].

11.

In the [Authentication] box, select the authentication method.

1. Guide to the Machine

36

opal-p2_mf2_com_user_guide_00142080_eng.xml