Ricoh Company Ltd. PRSP213NW1 用户手册

4. Copying Originals

MF

Copier Mode Screen

This section provides information about the screen when the machine is in copier mode.
By default, the display shows the copier screen when the machine is turned on.
If the scanner or fax screen is shown on the display, press the [Copy] key on the control panel to switch
to the copier screen.
Type 1 models do not have the [Copy] key. If ID card copy mode is being displayed, press the [Shortcut
to Func.] key again to switch to normal copier mode.
Type 1 and 5 models do not have the [Copy] key. If ID card copy mode is being displayed, press the
[Shortcut to Func.] key again to switch to normal copier mode.

DCT848

Standby mode screen

CVW200

1. Current status or messages

Displays the current status or messages.

2. Current settings

Displays the current tray, reproduction ratio, and scan settings.

3. Selection key items

Displays the functions you can use by pressing the corresponding selection keys.

4. Copy quantity

Displays the current copy quantity. You can change the copy quantity using the number keys.

opal-p2_mf2_com_user_guide_00142091_eng.xml

63