Ricoh Company Ltd. PRSP35101 用户手册
This operation makes the alert lamp blink. It indicates you need to restart the machine.
You can operate the machine while the lamp is blinking. But the lamp does not go off until you
restart the machine.
You can operate the machine while the lamp is blinking. But the lamp does not go off until you
restart the machine.
9.
Press the [Menu] key.
10.
If you are requested to restart the printer, turn off the printer, and then turn it back on.
11.
Print a configuration page to confirm the settings made.
Setting the Ethernet Speed
You can set the speed that the printer will use for Ethernet communication. For normal usage, the default
setting [Auto Select] is suitable and does not need to be changed. This setting allows two connected
interfaces to automatically determine the optimum speed that they will communicate at.
setting [Auto Select] is suitable and does not need to be changed. This setting allows two connected
interfaces to automatically determine the optimum speed that they will communicate at.
Router/HUB
Printer
[10Mbps
Half D.]
[10Mbps Full
D.]
[100Mbps
Half D.]
[100Mbps
Full D.]
[Auto Select]
10Mbps Half
Duplex
Duplex
10Mbps Full
Duplex
Duplex
100Mbps Half
Duplex
Duplex
100Mbps Full
Duplex
Duplex
auto-
negotiation
(auto selection)
negotiation
(auto selection)
• Connection cannot be established if the selected Ethernet speed does not match your network's
transmission speed.
• The use of this feature is recommended. To use it, select [Auto Select].
Ethernet Configuration
rinmei-p2_com_hardware_guide_gb_00060078_eng.xml
51
4
Draft 2011/08/30
表中の"-""○"は、セルのセン
ター揃えに修正しました。
ター揃えに修正しました。