Ricoh Company Ltd. RFAPL03 用户手册

Paper Thickness

Paper weight

Plain Paper 1

60 74 g/m

(16 20 lb. Bond)

Plain Paper 2

75 81 g/m

(20 lb. Bond)

Middle Thick

82 105 g/m

(20 28 lb. Bond)

Thick Paper 1

106 169 g/m

(28 lb. Bond 90 lb. Index)

Thick Paper 2

170 220 g/m

(65 80 lb. Cover)

Thick Paper 3

221 256 g/m

(80 lb. Cover 140 lb. Index)

Thick Paper 4

257 300 g/m

(140 lb. Index 110 lb. Cover)

*1 Print quality will decrease if the paper you are using is close to the minimum or maximum weight. Change

the paper weight setting to thinner or thicker.

• When loading paper in trays 1 4 or Tray 3 (LCT), place the print side face up. When loading paper

in the bypass tray or large capacity tray (LCT), place the print side face down.

• When using translucent paper or label paper, make sure to select the appropriate paper type under

Paper Type: Bypass Tray. See “System Settings”, Network and System Settings Reference .

• When you use the bypass tray, it is recommended to set the paper direction to .
• Certain types of paper produce noise when delivered. This noise does not indicate a problem and

print quality is unaffected. (Glossy paper and OHP transparencies can produce noise when
delivered.)

• When you load OHP transparencies, check the front and back of the sheets, and place them correctly,

or a misfeed might occur. For details, see Copy and Document Server Reference , and Printer
Reference .

• When you use OHP transparencies, fan them for each use.
• We recommend that you use a 4000 ANSI lumen or brighter overhead projector to project OHP

transparencies.

• When copying or printing onto OHP transparencies, the copy/print speed is slower than usual.
• When copying or printing onto thick paper of 106 300 g/m

(28 lb. Bond 110 lb. Cover), the

copy/print speed is slower than usual.

• When copying or printing onto prepunched paper, the copy/print speed is slower than usual.
• Flatten out curled sheets before loading them.
• If multiple sheet feeding occurs, load sheets one by one.