Apple A1026 用户手册

 

 

Logout

 | 

My Support

 | 

Guided

 | 

Expert

 | 

Archive

 | 

Help

 | 

Feedback

 

Add to My Support

TOPIC 

This document explains how to install the AirPort card in the iMac (Flat Panel) or the iMac (17-inch 
Flat Panel). 

DISCUSSION 

  

Note : If your AirPort Card came with the AirPort adapter (shown in Figure 1) remove the metal clip 

and pull the AirPort Card from the adapter. The adapter and metal clip are not used with the iMac 
(Flat Panel) computer. 

 

Figure 1 AirPort adapter  

Installation Instructions  

Important: Follow the instructions in this sheet carefully. Failure to follow these instructions could 

damage your equipment and void its warranty. Written and video instructions covering customer-
installable parts are available at 

http://www.info.apple.com/installparts/

 .  

Tools Required  

The only tool required for this procedure is a Phillips screwdriver.  

Opening the Computer  

 
Warning: Always shut down your computer before opening it to avoid damaging its internal 

components or causing injury.  

 

1. Unplug all cables from the computer except the power cord. 

2. Supporting the neck and the base, lay the computer down on a soft cloth (Figure 2).  

TITLE 

iMac (Flat Panel) and iMac (17-inch Flat Panel): How to Install or Replace an 
AirPort Card 

Article ID: 

Created:  

Modified:

26237 

1/25/02  

6/30/03