Andrew Wireless Innovations Group RPT-MR701 用户手册
User’s manual for Repeater MR801B Power
M0067A0A.doc
Id.-No 151111
Page 21
02-JUNE-99
2.8 Power supply
For the MR801B Power four power supplies are necessary.
Power supplies are available with different mains power. See list below for available power
supplies.
Power supplies are available with different mains power. See list below for available power
supplies.
•
115 VAC
±
15% / 40 - 65 Hz
•
230 VAC
±
15% / 40 - 65 Hz
•
185 - 320 VAC / 40 - 65 Hz
•
24 VDC
•
42 to 60 VDC
•
80 to 130 VDC
The following figure shows the mounting position of the power supplies in the MR801B
Power cabinet.
Power cabinet.
figure 2-7 Mounting position of power supplies
Each power supply is equipped with a power socket, protected with two fuses. Each power
supply can be switched on or off by means of an external switch. The modules of the Repeater
are voltage free if all power supplies are switched off. The power socket, however, is still
provided with mains power.
supply can be switched on or off by means of an external switch. The modules of the Repeater
are voltage free if all power supplies are switched off. The power socket, however, is still
provided with mains power.
See figure 2-8 ON / OFF position of external switch.
power socket
(service connector)
(service connector)