Andrew Wireless Innovations Group RPT-MR701 用户手册
User’s manual for Repeater MR801B Power
M0067A0A.doc
Id.-No 151111
Page 59
02-JUNE-99
figure 9-5 Position of dummy battery backup module
9.7 Replacement of duplexers
This description is valid for the one channel configuration of the Repeater only. For different
configurations refer to the assembly guide for the Repeater.
configurations refer to the assembly guide for the Repeater.
Remove the semi-rigid cables which connect the UL output and the DL output with the feed
forward amplifier by loosing the SMA connectors. Use a torque wrench. Then remove the
semi-rigid cables from the RF modules. (BTS side marked with a red spot).
forward amplifier by loosing the SMA connectors. Use a torque wrench. Then remove the
semi-rigid cables from the RF modules. (BTS side marked with a red spot).
It is recommended not to remove the amplifier which is mounted on the backside of the
duplexer. A new duplexer will be delivered with a premounted amplifier.
duplexer. A new duplexer will be delivered with a premounted amplifier.
dummy battery backup module