Andrew Wireless Innovations Group RPT-NODEC843 用户手册

 

User’s Manual for Node C Network Elements

 

Page 90 

 M0121A1A_uc.doc

 

 

•  Take off the fan unit and disconnect the connector cable from the cabinet. 
 

 

 

•  To install the new fan unit, proceed in reverse order. In order not to squeeze 

the fan connector cable, take care to position it correctly after its reconnection. 

 

 
The optional modem is screwed to a mounting plate which is fastened to the cabinet. 
In order to separate the modem from the plate, the mounting plate has to be taken off 
first.  
 
• Before starting to remove the 

mounting plate, disconnect all 
cables. 

•  Then, unscrew the four tallow-

drop screws M3x6 which fasten 
the mounting plate to the 
cabinet. 

• Take off the plate with the 

modem attached. The modem 
is fastened from the back to the 
plate with two countersunk 
head screws M4x10. 

•  Unscrew these screws and use 

them to fasten the new modem 
to the mounting plate. 

• Fasten the mounting plate 

again with the four tallow-drop 
screws M3x6 and reconnect all 
cables. 

 

 

Disconnecting the fan connector cable 

Positioning the fan connector cable

 
 
 
 

Position of modem