Andrew Wireless Innovations Group RPT-NODEC843 用户手册
User’s Manual for Node C Network Elements
Page 96
M0121A1A_uc.doc
7.2 SPECIFICATIONS
7.2.1 Electrical
Specifications
)
Note:
For detailed information, refer to the Environmental and Safety
Specifications leaflet of the supplier.
Specifications leaflet of the supplier.
Type
Node C 837
Node C 843
Frequency
Uplink:
824 – 849 MHz
Downlink:
869 – 894 MHz
CDMA carriers
Option 1:
Option 2:
Option 2:
1-11 adjacent (per module) 1.23 MHz carriers
1-3 adjacent (per module) 5 MHz carriers
DL output
power *
power *
1 CDMA carrier
2 CDMA carriers
4 CDMA carriers
2 CDMA carriers
4 CDMA carriers
+37.0 dBm
+34.0 dBm
+31.0 dBm
+34.0 dBm
+31.0 dBm
+43.0 dBm
+40.0 dBm
+37.0 dBm
+40.0 dBm
+37.0 dBm
UL composite output power
+23 dBm
Output power step size
1 dB
Output power accuracy over all
conditions
conditions
±1.5 dB
Min. DL input power for full output
power
power
-56 dBm
-60 dBm
Max. input power without damage
+10 dBm
Min. antenna isolation for max. gain
73 dB minimum
83 dB minimum
UL noise figure
3.5 dB
Delay
Option 1:
Option 2:
Option 2:
6.0 µs
8.2 µs
8.2 µs
Maximum gain
93 dB
103 dB
Gain adjust range
43 dB to 93 dB
53 dB to 103 dB
Return loss
15 dB
Uplink diversity
Standard
Spectral emission mask
-45 dBc @ 750 kHz
-60 dBc @ 1.98 MHz
Out of band gain
(rejection)
(rejection)
Option 1:
Option 2:
Option 2:
Gain -40 dB in 1.25 MHz
Gain -70 dB in 1.25 MHz
Gain -70 dB in 1.25 MHz
Modulation accuracy
RHO > 0.96
Spurious emissions
-13 dBm
Far off selectivity (ultimate rejection)
70 dB
Power supply
Standard:
Optional:
Optional:
110 VAC / 40-60 Hz
36-72 VDC
Power
consumption
consumption
idle:
full output power:
full output power:
200 W
250 W
250 W
300 W
500 W
500 W
RF connectors
7/16 DIN female; N female
Input / output impedance
50 Ohms
Ingress protection
Cabinet:
Fan:
Fan:
IP66
---
IP66
IP55
IP55
Temperature range
-33°C to +50°C
* see next page
All data is subject to change without notice