Zoom Telephonics Inc 1058WL 用户手册

 

This feature lets you change the default X6 ports for Internet and 
Telnet traffic. If, for example, you are running another Internet 
server on the network and that server is using Port 80, you need to 
assign a different port to the X6 to avoid a conflict. 
To assign Internet (HTTP) or Telnet ports, on the Advanced 
Setup page click Port Settings: 

 

Enter a port number between 61000 and 
62000. (The default is 80.) 

Enter a port number between 61000 and 
62000. (The default is 23.) 

Click Save Changes and then Write Settings to Flash to save the 
new port settings to permanent memory. Reboot your PC to make 
the settings active. 
When the new port settings are saved, network users who want to 
access the X6 via the Internet must add a colon [ : ] plus the new 
port number after the X6’s IP address. For example, in their 
browser’s address bar, users would enter 10.0.0.2:61101, where 
61101 is the new Internet port. 
To access the X6 via Telnet, users would type 
telnet[space]10.0.0.2[space]61102, where 61102 is the new port. 

Chapter 5: Using Advanced Setup 

 

 

79