Shenzhen PENGLIXIN Technology Co. Limited PLXWF2018 用户手册
User Manual
WIFI Otoscope
Scan the following QR code to install APP:
IOS Android
Specification:
1.WIFI transmission, compatible with Android and IOS systems
2.Camera resolution: 1280*720(720P)
3.6LED
4.600mA battery
5.One button photograph
2.Camera resolution: 1280*720(720P)
3.6LED
4.600mA battery
5.One button photograph
Operation:
1. press the power button about 2S for a long time to start the product. When the power starts,
the red wireless signal indicator lights up after 0.5s, and then automatically extinguishes until the
WIFI signal is working normally, then it stays bright (no data transmission) or continues to blink
(data transmission), and the product is initialized.
2. turn on the mobile phone WIFI switch, search the hot signal, connect the WIFI hotspot named
PLX_Camera_xxxx (XXXX is the 4 bit random code), enter the default password: 12345678, after
the connection completes, open the mobile phone software Mo‐View, enter the view interface.
3. click the middle part of the screen to open / close the control icon. The function of the icon is
to take pictures, video, playback, and settings in turn. Click the camera will automatically save the
current picture to the mobile phone; click on the video recording video, click again to end video
recording, video is automatically saved to the mobile phone; click playback can view the stored
photos and videos; click on the settings you can modify the hotspot name and password
resolution etc.. Hot names and passwords need to be restarted to take effect.
4., the blue indicator is the battery indicator lamp. The product shared 4 lights to indicate the
electricity. 1 lights indicate the remaining electricity is 25%, 2 lights indicate the remaining
electricity is 50%, and the analogous value is 75%, 100%.
5. long according to the power button about 2s to red wireless signal lights out, product
shutdown. The blue power indicator will be extinguished automatically after about 15s.