Bogen MVP210BG 产品宣传页

•

1-, 2-, 4-, or 8- analog ports for communication over an
existing IP network or the Internet

• Ethernet connectivity and full IP compatibility with

existing routers and WAN infrastructure

•  Overhead voice paging to multiple locations within a

facility, nearby or branch office buildings, or to remote
locations 

•  Single- or multi-zone paging at any or all locations when

used with Bogen’s Multi-Zone telephone paging
interface (UTI3

12)

• Efficiently communicate company-wide emergency

alerts or general announcements

• FXS/FXO connector on each port for direct connec-

tion to Bogen’s telephone paging interfaces

• Configuration and management using a Web 

browser or Microsoft Windows

®

• Utilizes the H.323 or SIP protocols to provide 

complete interoperability with other Internet telephony
solutions

• Multi-port models provide contact closure Receive &

Transmit in E&M mode

• Connects directly to telephone or PBX

• Single Port Protocol (SPP) allows the use of 

dynamic IP addresses

• Voice compression to 5.3K bps per call with 

support for multiple algorithms, including ITU G.723
and G.729

• Minimum requirements: Ethernet network, WAN

connection, IP addresses

• Supports H.450 supplementary services to provide for

call transfer, call forwarding, call hold, call waiting and
name identification

• T.38 real-time fax relay for interoperability among other

VoIP equipment

• PSTN fail-over automatically routes calls over the

PSTN network if the IP network is down

Specifications subject to change without notice.
© 2005 Bogen Communications, Inc.
Part No. 54-8023-25B   0807

Bogen’s Voice Over IP gateways (Models MVP

130BG, MVP210BG, MVP410BG, and MVP810BG) allow  

paging communications to be sent over the Internet or Intranet. FXS pass through expands the paging 
capabilities of Bogen’s PCM zone paging system by providing a continuous connection between buildings using
a Local-Area or Wide-Area Network (LAN/WAN).

Bogen’s VoIP gateways are available in models ranging from 

1 to 8 ports. Each gateway connects directly to

Bogen paging systems and equipment to provide overhead paging to all locations within a facility or across a
campus without running new lines.  The 

1-port model supports FXS and FXO. Multi-port models support FXS,

FXO, and provide contact closure Receive & Transmit in E&M mode.

The VoIP gateways are easily managed locally using a Windows

®

-based software application or remotely with a

web browser or SNMP. 

Bogen’s VoIP gateways can also be used for toll-free voice or fax communications when connected to phones,
fax machines, key systems, PSTN lines, or a PBX to provide real-time, toll-quality voice connections to any office
on your VoIP network. 

Windows

®

is a registered trademark of Microsoft Corporation.