Hammer Fiber Optics Investments LTD. AIRTC31 用户手册
2 How to install the AIR CPE unit at customer side
In the following pages, you will find step-by-step instructions for:
Determining Base Station direction for aiming antenna
Finding suitable antenna site
Installing mast
Assembling Antenna on ground
Attaching antenna to mast
Routing RG6 cable
Attaching Transceiver(LNB) to antenna
Aiming and fine-tuning antenna
Step 1: Determining Base station direction for aiming antenna
Caution
First of all you must find an appropriate position on the building with CLEAR LINE OF
SIGHT to the AIR base station .In front of the antenna there should not be any obstacles
that could hinder the signal and the Fresnel zones. On figures bellow see diference
between good and bad line of sight.
SIGHT to the AIR base station .In front of the antenna there should not be any obstacles
that could hinder the signal and the Fresnel zones. On figures bellow see diference
between good and bad line of sight.
Figure 2: Clear line of sight