Dongguan Xing Yue Electronic co. Ltd XO-9222-2 用户手册
Woven Fabric Bluetooth
Speaker
Instruction Manual
XO-9222-2
1 x Woven Fabric Bluetooth Speaker
1 x USB to Micro-USB charging cable
1 x 3.5mm Aux Cable
1 x Instruction Manual
1 x USB to Micro-USB charging cable
1 x 3.5mm Aux Cable
1 x Instruction Manual
Working voltage:3.4-4.2V
Charging power supply: DC5V/500mA
(Battery Indicator LED is red when charging.
Turns off when fully charged).
Low power warning: When voltage is lower
than 3.4V, two beeps will sound and the
Charging power supply: DC5V/500mA
(Battery Indicator LED is red when charging.
Turns off when fully charged).
Low power warning: When voltage is lower
than 3.4V, two beeps will sound and the
battery indicator LED will flash blue.
Speaker functions via Bluetooth and line-in
mode Bluetooth working range <10M Speaker
functions via the 3.5mm cable (included) when
connected to device.
Speaker functions via Bluetooth and line-in
mode Bluetooth working range <10M Speaker
functions via the 3.5mm cable (included) when
connected to device.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions:
This device may not cause harmful
interference, and
This device must accept any interference
received, including interference that may cause
undesired operation.
Rules. Operation is subject to the following
two conditions:
This device may not cause harmful
interference, and
This device must accept any interference
received, including interference that may cause
undesired operation.
Warning:
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s authority to
operate the equipment.
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s authority to
operate the equipment.
In Bluetooth Mode:
The LED will flash blue to indicate pairing
mode. When connected, the LED will flash
slow, and then remain with a constant blue
LED.
The LED will flash blue to indicate pairing
mode. When connected, the LED will flash
slow, and then remain with a constant blue
LED.
Note: In order to charge device use only
accessory cable (provided with device) or the
cable included with your own device by the
manufacturer.
accessory cable (provided with device) or the
cable included with your own device by the
manufacturer.
WARNING–When using this product, basic
precautions should always be followed,
including the following:
Read all the instructions before using the
product.
Device main unit contains an internal
lithium-ion battery. Upon initial use or after a
prolonged storage period, fully charge it once.
The unit’s full performance is achieved only
after 2 or 3 completed charge and discharge
cycles.
To reduce the risk of injury, close supervision
is necessary when the product is used near
children.
Do not expose the device to moisture.
Use of a power supply or charger not
recommended or sold by device manufacturer
may result in a risk of fire or injury to persons.
Do not use the device in excess of its output
rating. Overload outputs above rating may
result in a risk of fire or injury.
Do not use the device if damaged or modified.
Damaged or modified batteries may exhibit
precautions should always be followed,
including the following:
Read all the instructions before using the
product.
Device main unit contains an internal
lithium-ion battery. Upon initial use or after a
prolonged storage period, fully charge it once.
The unit’s full performance is achieved only
after 2 or 3 completed charge and discharge
cycles.
To reduce the risk of injury, close supervision
is necessary when the product is used near
children.
Do not expose the device to moisture.
Use of a power supply or charger not
recommended or sold by device manufacturer
may result in a risk of fire or injury to persons.
Do not use the device in excess of its output
rating. Overload outputs above rating may
result in a risk of fire or injury.
Do not use the device if damaged or modified.
Damaged or modified batteries may exhibit
unpredictable behavior resulting in fire,
explosion or risk of injury.
Do not disassemble the device. Take it to a
qualified service person when service or repair
is required. Incorrect reassembly may result in
a risk of fire or injury.
Do not expose a device to fire or excessive
temperature. Exposure to fire or temperatures
above 212ºF may cause explosion.
Have services performed by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the product
is maintained.
Do not charge the device while using the
device to charge another device. Do not charge
the device for more than 4-6 hours and do not
leave unattended.
Switch off the device when not in use.
explosion or risk of injury.
Do not disassemble the device. Take it to a
qualified service person when service or repair
is required. Incorrect reassembly may result in
a risk of fire or injury.
Do not expose a device to fire or excessive
temperature. Exposure to fire or temperatures
above 212ºF may cause explosion.
Have services performed by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the product
is maintained.
Do not charge the device while using the
device to charge another device. Do not charge
the device for more than 4-6 hours and do not
leave unattended.
Switch off the device when not in use.
•
(1)
(2)
*
*
•
1.
2.
3.
4.
5.
6.
6.
7.
8.
9.
10.
11.
12.
13.
1.
2.
2.
3.
4.
What’s included:
Tech Specifications
FCC Statement:
SAFETY PRECAUTIONS:
MADE IN CHINA
Charging the speaker:
Using a regulated USB adapter. Connect a USB
cable to your phone’s USB adapter. Using the
Micro-USB connector, connect the other end
of the USB cable to the “DC 5V” port on the
speaker. Plug the USB adapter into the outlet
to begin charging.
Using your computer. Connect a USB cable
to a USB outlet on your computer. Using the
Micro-USB connector, connect the other end
of the USB cable to an “DC 5V” port on the
speaker. Make sure the computer is on to
begin charging the speaker.
Connecting the speaker with Bluetooth:
Press the Power Button to turn the speaker
ON. The speaker will default to Bluetooth
Mode. Using a Bluetooth enabled device,
search for “Woven BT” from the list of
available pairs. Once selected, the connection
should be successful.
Using the speaker:
When receiving a phone call, the speaker
will pause the current audio. Press the Play/
Answer button to answer the call, press this
button again to end the call.
Short press
Using a regulated USB adapter. Connect a USB
cable to your phone’s USB adapter. Using the
Micro-USB connector, connect the other end
of the USB cable to the “DC 5V” port on the
speaker. Plug the USB adapter into the outlet
to begin charging.
Using your computer. Connect a USB cable
to a USB outlet on your computer. Using the
Micro-USB connector, connect the other end
of the USB cable to an “DC 5V” port on the
speaker. Make sure the computer is on to
begin charging the speaker.
Connecting the speaker with Bluetooth:
Press the Power Button to turn the speaker
ON. The speaker will default to Bluetooth
Mode. Using a Bluetooth enabled device,
search for “Woven BT” from the list of
available pairs. Once selected, the connection
should be successful.
Using the speaker:
When receiving a phone call, the speaker
will pause the current audio. Press the Play/
Answer button to answer the call, press this
button again to end the call.
Short press
: play/pause the audio
Short Press
: next track
Long press
: volume increase
Short Press
: previous track
Long press
: volume decrease
1.
a.
a.
b.
2.
a.
a.
3.
a.
a.
b.
c.
d.
e.
f.
c.
d.
e.
f.
Instructions:
7198-18.indd 1
6/6/17 1:14 PM