Dongguan Xing Yue Electronic co. Ltd XO-9672 用户手册
Wooden Bluetooth Speaker w/Wireless Charging Pad
Instruction Manual
Speaker part:.
Specifications
1. Working voltage:3.4-4.2V
2. Charging power supply: DC5V/800mA (Battery Indicator LED is red
when charging. Turns off when fully charged).
2. Charging power supply: DC5V/800mA (Battery Indicator LED is red
when charging. Turns off when fully charged).
3. Low power warning: When voltage is lower than 3.4V, two beeps will
sound.
Operation
Turn on speaker using the switch button located on the middle .
The LED indicator will flash in blue.
the device is in pairing mode.
A. Bluetooth mode – pairing with
Operation
Turn on speaker using the switch button located on the middle .
The LED indicator will flash in blue.
the device is in pairing mode.
A. Bluetooth mode – pairing with
****:
1. The blue flashing LED indicates pairing mode. Once a connection with
media device has been established, the flash will slow, remaining blue.
2. “-” Button: Click to skip to decrease volume. Press and hold to previous track
media device has been established, the flash will slow, remaining blue.
2. “-” Button: Click to skip to decrease volume. Press and hold to previous track
3. “ ” Button: Click to pause/play music, answer incoming calls.
4. “+” Button: Click to skip to increase volume. Press and hold to next track.
B. 3.5mm line-in mode:
1. Insert one end of 3.5mm cable (included) to the line-in port and
connect the other end to the device’s line-in port. (LED will illuminate blue.
Line-in function does not support answering of incoming calls).
B. 3.5mm line-in mode:
1. Insert one end of 3.5mm cable (included) to the line-in port and
connect the other end to the device’s line-in port. (LED will illuminate blue.
Line-in function does not support answering of incoming calls).
2. “
” Button: Click to pause/play music.
3. “-”/ “+” Button: Click to decrease/increase volume.
Charging the speaker:
Charging the speaker:
Using a regulated USB adapter .Connect a USB cable to a USB adapter. Using
the
Micro-USB connector, connect the other end of the USB cable to the charging port
on the speaker. Plug the USB adapter into the outlet to begin charging.
The LED will light up in red while in charging, turns off when fully charged.
on the speaker. Plug the USB adapter into the outlet to begin charging.
The LED will light up in red while in charging, turns off when fully charged.