Buddy Platform Inc. SENSE100 用户手册
Buddy OHM User Manual
Overview
The Buddy OHM system has the capability to monitor electrical energy use / generation,
temperature and humidity.
The system is made up of five main units. These can be assembled and configured to work for
a variety of applications. The system is fully open-source, both hardware and software. All
hardware is based on the Arduino and Raspberry Pi platforms.
The hardware options to set up a home energy monitor are as follows
The Buddy OHM is an all-in-one Raspberry Pi based energy monitoring unit making for a
simple installation where Ethernet or 3G dongle is available at the meter location.
simple installation where Ethernet or 3G dongle is available at the meter location.
The Buddy OHM can monitor two single-phase AC circuits using clip-on CT sensors. The
Buddy OHM can also monitor temperature, and interface directly with utility meters via an
optical pulse sensor.
Buddy OHM can also monitor temperature, and interface directly with utility meters via an
optical pulse sensor.
Raspberry Pi-based energy monitor
Install next to utility meter
Local & remote data logging with Buddy cloud , our open-source web-app for
processing, logging and visualising energy and other environmental data, such as
humidity and temperature
processing, logging and visualising energy and other environmental data, such as
humidity and temperature
Requires 3G dongle
Requires pre-built SD card image (included)
Sensors Required:
1 X Clip-on CT sensors (can accept up to two CT sensors; one is included as standard
with the Buddy OHM)
with the Buddy OHM)
1 x AC-AC voltage sensor adapter (optional but highly recommended)
Power Adapters Required: 1 x USB 5V DC