Pioneer BDC-TD03RS 用户手册
PIONEER CONFIDENTIAL
Page
5
Name of Parts / Function / Setting
BDC-TD03RS
3. Name of Parts / Function / Setting
3.1.
Front
(1)
(3)
(2)
(4)
Figure 3-A: Front View
Disc Loading Tray (1)
Open the loading tray by pressing the eject button. And set a disc with the label facing up.
Push the front part of tray to load the tray with the disc.
Push the front part of tray to load the tray with the disc.
Eject Button (2)
To unload the disc, press the button.
BUSY Indicator (3)
It is lit when the data on the disc is accessed.
Forced Eject Hole (4)
Insert a stiff rod into the hole and push to eject the tray when the tray doesn’t unload by pressing the Eject
button. In the normal operation, the eject button should be used to unload the tray. Make sure the power of
the drive is turned off and wait more than one minute till the disc rotation is stopped when access the eject
hole.
button. In the normal operation, the eject button should be used to unload the tray. Make sure the power of
the drive is turned off and wait more than one minute till the disc rotation is stopped when access the eject
hole.
Notes:
The drive corresponds to GBAS.
GBAS is “Generic Bezel Attachment Specification” by Dell Computer Corporation.
The figure 3-A as above is for Pioneer standard bezel and it is not attached to this drive when
shipping.
shipping.
Revision 0.50
February 9th, 2010
5 / 25