RYNAN Technologies Pte. Ltd. 305001BF 用户手册
Device layout
Control
Easy to use by 3 way:
Fingerprint.
Mobile App.
3 touch.
Stored & shared
Clever lock has a capacitive fingerprint sensor. You can add
up to 32 fingerprints data.
Share the user account with total 4 account.
The following suggestions will help your device working better:
Make sure your finger is clean and not wet.
Put your finger full covered on the fingerprint sensor.
You can rotate and put your fingers with 360° rotation.
Ownership
Easy to registration your ownership by the email.
Install the application
Clever application is management
software of the Clever lock with
standard-based communication via
Bluetooth 4.0
Choose your Clever
When the user start the application.
The Clever application's scanning interface is the first user
interface.
After that, touch on the fingerprint sensor of Clever Lock and
After that, touch on the fingerprint sensor of Clever Lock and
tap to connect your lock on the mobile app.
Charging the battery
Before using the device for the first time, you must charge the
battery.
Charge your device using the performance charger (DC: 5V -
1A). You can also charge your device using a USB cable
connected to a computer, but charging might take longer.
Hold the cable with the facing up, and connect the cable into
Hold the cable with the facing up, and connect the cable into
the function port on your device. Plug the charger into a power
outlet.
Keeping your battery charged
Your Clever device uses a lithium polymer battery. To
maximize your use the battery, when possible, do the
following:
Avoid using the device while charging to help it recharge
faster.
Avoid charging, using, or storing your device in extremely
hot or cold places.
Should charge your Clever every 3 months. Avoid your
device is turned off in low battery condition for a long time.
LED status indicator
The following table shows what the LED status indicators are
for and what the different colors or flashing of the lights mean.
LED color Status
Description
No light
Clever is in sleep mode.
The battery in Clever is at 0%
The battery in Clever is at 0%
(connect to a power source via
USB to charge).
Green
Solid
Unlock completed.
Pulse
Clever is connected to power
source and is charging. When the
charging is full, the LED will turn
off to save energy.
Red
Solid
Lock completed.
Yellow
Flashing (one flash
per five seconds)
Battery level of Clever is
under 30%.
Fast Flashing
Fingerprint data processing.
Solid
Clever is busy.
Notice
© 2015 Rynan Technologies Pte Ltd. All rights reserved.
USER MANUAL